Evenflo REO by Revolve360 Rotational Convertible Car Seat (Holden)

Product

A forward-facing convertible car seat with a seated child, visible five-point harness, padded headrest, integrated cup holders, and a colored swivel base partially visible under the seat.

• Seat shell and paddingHigh-back car seat shell with contoured side wings and thick padded cushions; outer shell appears covered in darker gray fabric with lighter gray inner headrest and cushion panels.
  1 region

  x 0.18 · y 0.06 · w 0.54 · h 0.72 (high)
• HeadrestTall padded headrest with a lighter gray central cushion surrounded by a darker gray outer ring and visible seam lines.
  1 region

  x 0.32 · y 0.06 · w 0.26 · h 0.20 (high)
• HarnessBlack five-point harness straps visible over the child's shoulders and chest with a central black chest clip; straps are webbed fabric with a smooth finish.
  1 region

  x 0.31 · y 0.25 · w 0.30 · h 0.34 (high)
• Cup holdersTwo molded cup holders, one on each armrest area, both are black and cylindrical with smooth interior surfaces.
  2 regions

  x 0.12 · y 0.58 · w 0.18 · h 0.20 (high); x 0.60 · y 0.58 · w 0.16 · h 0.20 (high)
• Swivel baseBright blue colored base plate visible under the front of the seat, appearing as a molded plastic component that peeks out from beneath the cushion.
  1 region

  x 0.18 · y 0.71 · w 0.36 · h 0.16 (medium)
• Visible label or instruction panelSmall rectangular label or instructional sticker partially visible on the lower left side of the base, mostly cropped and not legible.Partial
  1 region

  x 0.05 · y 0.78 · w 0.12 · h 0.12 (medium)
• Child in seatA small child seated in the car seat wearing a striped top and jeans; legs bent and feet resting on the seat, illustrating the seat in actual use.
  1 region

  x 0.28 · y 0.18 · w 0.44 · h 0.56 (high)

Other

Lifestyle photograph showing the car interior with an adult's hand reaching toward the seat; soft natural lighting and shallow depth of field.

• Shot compositionLifestyle interior shot framing the car seat and child from the open rear door perspective; seat occupies center-left of the frame with car interior visible behind.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 0.86 (high)
• Background elementsVehicle interior elements visible including front passenger seat back, door frame, and part of the dashboard; these are out of focus compared with the subject.
  1 region

  x 0.52 · y 0.06 · w 0.46 · h 0.44 (high)
• Adult hand and accessoryAn adult's hand wearing bracelets reaches toward the seat from the right edge of the frame; hand and wrist are partially cropped.
  1 region

  x 0.75 · y 0.36 · w 0.20 · h 0.24 (high)
• Lighting and focusEven natural lighting with soft shadows; main subject (seat and child) is in sharp focus while background elements are softer.
• Promotional text panelLarge white panel at the bottom of the image containing bold black marketing text.
  1 region

  x 0.00 · y 0.86 · w 1.00 · h 0.14 (high)
• Legible text element“ONE-HAND, 360° ROTATION”
  1 region

  x 0.12 · y 0.89 · w 0.76 · h 0.08 (high)

Colors

Product

Three-quarter front view of a padded convertible car seat with integrated headrest, five-point harness, two cup holders, and a rounded rotating base.

• Overall shell shapeTapered deep bucket shell with high side wings and a rounded outer skirt; shell appears molded plastic covered by fabric.
  1 region

  x 0.15 · y 0.06 · w 0.70 · h 0.90 (high)
• Headrest and side wingsPadded contoured headrest with pronounced lateral wings and integrated cushion panels that cradle the head on both sides.
  1 region

  x 0.45 · y 0.06 · w 0.34 · h 0.26 (high)
• Inner cushion materialLight blue-gray padded fabric inserts for seat back and base with visible seam lines and slightly quilted contours.
  1 region

  x 0.35 · y 0.18 · w 0.40 · h 0.56 (high)
• Five-point harnessCentral harness with shoulder straps, a crotch buckle with a red release button, and a small black chest clip positioned on the straps.
  1 region

  x 0.43 · y 0.40 · w 0.22 · h 0.30 (high)
• Cup holdersTwo round black cup holders integrated into the arm areas on both left and right sides of the seat.
  2 regions

  x 0.18 · y 0.52 · w 0.18 · h 0.18 (high); x 0.58 · y 0.52 · w 0.18 · h 0.18 (high)
• Rounded baseLarge rounded black base that the seat shell rests on; front edge shows embossed lettering and a small green indicator badge.
  1 region

  x 0.26 · y 0.78 · w 0.50 · h 0.18 (high)
• Right-side instruction panelVertical multicolor instruction/sticker panel attached to the outer right shell, showing pictorial installation graphics.
  1 region

  x 0.78 · y 0.34 · w 0.14 · h 0.48 (high)
• Center front strap tabSmall black fabric loop on the front base of the seat likely used for adjustment or release, located between the cup holders.
  1 region

  x 0.33 · y 0.66 · w 0.12 · h 0.10 (medium)
• Brand text on headrest“evenflo”
  1 region

  x 0.54 · y 0.13 · w 0.12 · h 0.06 (high)

Other

Studio shot of the car seat on a plain white background photographed from a slightly elevated three-quarter front angle with even diffuse lighting and soft shadow beneath the base.

• Shot compositionProduct centered in frame, shown at a slight angle so both front and right-side details are visible.
• BackgroundUniform white background with no visible props or distracting elements.
• Lighting and shadowEven studio lighting with a soft shadow cast below and slightly left of the base.

Colors

Product

Close-up of the car seat headrest and upper shell showing padded side wings, central fabric back, a black adjustable headrest handle with position labeling, and a visible Evenflo logo printed on the fabric.

• Headrest handle label“Black plastic headrest adjustment handle across the top of the seat with white printed label reading 'ADJUSTABLE 11 POSITIONS' and a circled '11' between the words.”
  1 region

  x 0.23 · y 0.04 · w 0.54 · h 0.12 (high)
• Evenflo wordmark“White 'evenflo.' wordmark and circular logo printed on the center upper back fabric of the seat.”
  1 region

  x 0.36 · y 0.30 · w 0.28 · h 0.10 (high)
• Central back cushionTapered central back cushion covered in smooth blue-gray fabric with slight horizontal seam near the top and visible stitching where it meets the headrest opening.
  1 region

  x 0.20 · y 0.18 · w 0.60 · h 0.48 (high)
• Side wings and insert padsPadded side wings on both left and right with contoured shapes; inner-facing edges have a narrower textured trim panel in a slightly different gray pattern.
  2 regions

  x 0.03 · y 0.16 · w 0.28 · h 0.68 (high); x 0.69 · y 0.18 · w 0.28 · h 0.64 (high)
• Top central handle cutoutRectangular cutout area beneath the adjustment handle that creates a recessed gap between the two headrest pads.
  1 region

  x 0.33 · y 0.12 · w 0.34 · h 0.12 (high)
• Visible hand and braceletA hand grasping the top of the headrest handle; wrist shows a multi-bead bracelet and part of a sleeve, occluding the upper center of the handle.
  1 region

  x 0.48 · y 0.00 · w 0.30 · h 0.14 (high)

Other

Image is a close, well-lit studio-style product shot with a white lower marketing overlay containing bold black text; slight shadowing and cropping at image edges.

• Marketing overlay text“Bold black marketing headline printed on a white lower band of the image reading '11-POSITION HEADREST'.”
  1 region

  x 0.00 · y 0.78 · w 1.00 · h 0.22 (high)
• Shot compositionTight cropped frontal close-up of the seat headrest area filling most of the frame; top of the handle and part of a hand slightly extend to the image top edge.
• Background and lightingNeutral out-of-focus background above the product and a white band below; soft, even lighting with mild shadows inside headrest creases.

Colors

Product

Front-facing convertible car seat photographed upright; visible features include a molded dark outer shell, light blue-gray padded insert and headrest, five-point harness with a central red release button, and two integrated cup holders at the lower sides.

• Overall shapeSingle-piece molded bucket seat with high contoured sides and integrated head surround, photographed from the front.
  1 region

  x 0.05 · y 0.03 · w 0.90 · h 0.94 (medium)
• Outer shell material and colorDark charcoal textured outer shell visible on the seat sides, outer head wings, and base surround.
  1 region

  x 0.05 · y 0.06 · w 0.90 · h 0.88 (medium)
• Inner cushion and headrestRemovable-looking padded insert and headrest in a light blue-gray fabric with sewn edge piping and additional small side cushions.
  1 region

  x 0.28 · y 0.12 · w 0.44 · h 0.52 (high)
• Harness and buckleFive-point harness straps converge to a central black buckle housing with a prominent red release button.
  2 regions

  x 0.36 · y 0.38 · w 0.28 · h 0.26 (high); x 0.44 · y 0.52 · w 0.12 · h 0.08 (high)
• Cup holdersTwo cylindrical cup holders molded into the lower side wings, one on each side of the seating area.
  2 regions

  x 0.03 · y 0.55 · w 0.20 · h 0.23 (high); x 0.77 · y 0.55 · w 0.20 · h 0.23 (high)
• Adjustable headrest labelSmall rectangular label on the top center of the headrest area with high-contrast text.
  1 region

  x 0.41 · y 0.02 · w 0.18 · h 0.06 (high)
• Warning labelYellow vertical warning label visible on the left inner headrest area; printed text on the label is too small to read at this resolution.
  1 region

  x 0.23 · y 0.17 · w 0.10 · h 0.20 (high)
• Front lower embroidered textSmall white printed or embroidered text on the front lower edge of the seat cushion.
  1 region

  x 0.48 · y 0.72 · w 0.34 · h 0.10 (high)
• Front strapSingle vertical black strap hanging down from the center front of the seat base.
  1 region

  x 0.45 · y 0.78 · w 0.10 · h 0.20 (high)
• Text: adjustable positions“ADJUSTABLE 8 POSITIONS”
  1 region

  x 0.41 · y 0.02 · w 0.18 · h 0.06 (high)
• Text: model mark on front“REO by REVOLVE360”
  1 region

  x 0.48 · y 0.72 · w 0.34 · h 0.10 (high)

Packaging

Clear plastic sheet beneath the seat and cardboard shipping boxes visible behind the seat; box labels and barcodes are present but mostly not legible.

• Underlay plasticClear crinkled plastic sheet placed under the seat, extending beyond the base.
  1 region

  x 0.10 · y 0.78 · w 0.80 · h 0.20 (high)
• Background shipping boxesStacked cardboard boxes with printed labels and visible barcodes behind the seat; printed text on these boxes is not transcribed.
  1 region

  x 0.02 · y 0.00 · w 0.96 · h 0.32 (medium)
• Illegible box textDense small printed blocks and barcode strips on the boxes that are legible in shape but too small to read at this resolution.Partial
  1 region

  x 0.58 · y 0.00 · w 0.40 · h 0.26 (medium)

Other

Warehouse or retail staging photograph taken front-on with even overhead lighting; visible concrete floor and scattered reflections and shadows.

• Shot compositionFront-on centered shot showing the full frontal face of the car seat with some surrounding context.
• Background environmentWarehouse or storeroom setting with stacked product boxes and shelving visible behind the seat.
• Floor and reflectionsConcrete or warehouse floor visible at the bottom with reflections from overhead light on the plastic underlay.
  1 region

  x 0.10 · y 0.82 · w 0.80 · h 0.16 (high)
• Lighting and shadowEven overhead lighting with soft shadows around the seat base and inside the cup holders.

Colors

Product

Close-up of a curved level/bubble indicator integrated into a black plastic surface; transparent curved capsule contains a metallic ball that should rest within a central blue band flanked by red zones. White label field with instructional text surrounds the capsule.

• Curved bubble capsuleTransparent curved plastic capsule set into a recessed triangular white label area; capsule has a clear molded channel holding a small metallic ball that rolls along the channel.
  1 region

  x 0.18 · y 0.21 · w 0.64 · h 0.38 (high)
• Metallic ballShiny metallic ball visible inside the capsule, currently positioned slightly right of center overlapping the blue band and adjacent to a small light-blue circular ring printed under the capsule.
  1 region

  x 0.51 · y 0.33 · w 0.08 · h 0.12 (high)
• Blue central bandA solid blue rectangular curved band printed directly under the capsule forming the central target area for the ball.
  1 region

  x 0.34 · y 0.30 · w 0.32 · h 0.14 (high)
• Red side zonesRed printed zones appear on both the left and right ends of the blue band, forming warning areas outside the central blue.
  2 regions

  x 0.20 · y 0.30 · w 0.11 · h 0.14 (high); x 0.66 · y 0.30 · w 0.11 · h 0.14 (high)
• White instructional labelWhite printed label area surrounding the capsule that contains bilingual instructional text and small printed codes, set into black plastic housing.
  1 region

  x 0.10 · y 0.06 · w 0.78 · h 0.66 (high)
• Black plastic housingMatte black plastic surrounding the white label and capsule, forming the larger device surface visible at the image edges.
  1 region

  x 0.00 · y 0.00 · w 0.98 · h 0.98 (medium)
• Instructional text line 1“Ball MUST be entirely in blue.”
  1 region

  x 0.15 · y 0.07 · w 0.72 · h 0.12 (high)
• Instructional text line 2 (French)“La bulle DOIT être entièrement dans la zone bleue.”
  1 region

  x 0.15 · y 0.12 · w 0.72 · h 0.12 (high)
• Age text left“3+ months / mois”
  1 region

  x 0.20 · y 0.55 · w 0.22 · h 0.14 (high)
• Age text right“0+ months / mois”
  1 region

  x 0.45 · y 0.55 · w 0.28 · h 0.14 (high)
• Printed code“NWL0000598767A”
  1 region

  x 0.30 · y 0.68 · w 0.40 · h 0.10 (high)

Other

Close-up, well-lit detail shot with a photographic watermark in the lower-left corner and visible reflections on the capsule surface.

• Watermark logoWhite photographic watermark in the lower-left reading 'CAR SEATS for The Littles' with a decorative emblem; appears over the image and not part of the product label.
  1 region

  x 0.02 · y 0.70 · w 0.40 · h 0.28 (high)
• Reflections and glareSpecular reflections visible on the clear capsule surface and on the metallic ball, indicating a bright directional light source; slight shadowing at the capsule edges.
• Shot compositionTight cropped detail framing focused on the indicator area; parts of the surrounding plastic are cropped at image edges.

Colors