New Diono Cambria LE 2-in-1 Booster Car Seat, 40–120 Pounds (Black)

2-in-1 booster car seat converts from high-back to backless, with side impact protection and adjustable headrest for children 40-120 lbs.

2-in-1 booster design; enhanced side impact protection; proper belt positioning; 6-position headrest; lightweight and portable; comfortable support; forward-facing booster; grows with your child.

Color

Black · black

Style

convertible, lightweight, travel-friendly

Occasion

travel, everyday

Gender

unisex

Age Group

kids

Condition

new

Weight

12 lb

Category

Baby & Toddler > Baby Transport > Baby & Toddler Car Seats

01

Product

Front-facing view of a high-back booster car seat with contoured headrest, pronounced side wings, integrated armrests and two foldable cup holders. Black fabric cover with visible white logos and small red belt-guide accents.

• Overall shapeHigh-back booster seat shown from the front with a separate contoured headrest, tall narrow back support, wide shoulder/side wings, and a padded seat base with integrated armrests.
• Headrest constructionPadded headrest with large lateral wings that project forward; center of headrest has a recessed vertical section connecting to the back panel.
  1 region

  x 0.28 · y 0.02 · w 0.44 · h 0.25 (high)
• Fabric cover and stitchingSmooth black fabric cover over the back, headrest and seat with visible seam lines forming panels on the backrest and seat base.
• ArmrestsPadded short armrests integrated into the seat base on both sides; each armrest curves upward at the front.
• Cup holdersTwo molded plastic cup holders mounted to the outer front corners of the seat base; one on each side and finished in dark gray plastic.
  2 regions

  x 0.03 · y 0.86 · w 0.20 · h 0.11 (high); x 0.78 · y 0.86 · w 0.18 · h 0.11 (high)
• Belt guide accentsSmall red fabric or plastic belt-guide loops visible at the junction between the backrest and seat base on both left and right sides.
  2 regions

  x 0.26 · y 0.58 · w 0.06 · h 0.06 (high); x 0.66 · y 0.58 · w 0.06 · h 0.06 (high)
• Warning label panelRectangular label panel with multiple small lines of printed text and a yellow header area located on the lower outer left side of the seat base; text is too small to read at this resolution.
  1 region

  x 0.01 · y 0.74 · w 0.18 · h 0.24 (high)
• Headrest logo“White printed 'diono' wordmark with a rounded-square emblem above it on the center of the headrest.”
  1 region

  x 0.36 · y 0.07 · w 0.24 · h 0.14 (high)
• Left side logo“Vertical white 'diono' wordmark printed on the outer face of the left shoulder/side wing.”
  1 region

  x 0.03 · y 0.34 · w 0.12 · h 0.28 (high)
• Small fabric tag on right headrestSmall dark fabric tag attached to the outer edge of the right headrest wing; printed text on the tag is too small to read.
  1 region

  x 0.70 · y 0.12 · w 0.04 · h 0.06 (medium)

Other

Studio product shot on a white background showing the full front of the booster seat. Even, soft lighting with minimal shadowing; image cropped close to the seat edges on left and right.

• Shot compositionProduct is centered and photographed against a clean white background with the full seat visible top to bottom; some small white margin left and right.
• Lighting and shadowSoft, even studio lighting with diffused shadows visible beneath the seat and slight shading on curved surfaces to show contour.
• Image croppingLeftmost outer edge of the seat is near the image left edge and the right side has a small margin; bottom of seat rests on the visible surface with a thin shadow.
• Illegible fine printDense fine-print block present on the lower left label area, illegible at this resolution.
  1 region

  x 0.01 · y 0.74 · w 0.18 · h 0.24 (high)

Colors

matte black· fabric cover#0E0E0Edark gray· cup holders#4C4B4Bbright red· belt-guide accentswhite· printed logos

02

Product

Two high-back booster seats installed side-by-side in a vehicle: a magenta/pink padded booster on the left and a black padded booster on the right, each with integrated headrests, armrests, molded cup holders, and vehicle lap-shoulder belts routed over the child mannequins.

• Left booster overallHigh-back booster seat with contoured padded headrest and side wings, bright pink/magenta fabric on headrest and upper side panels, darker magenta seat cushion, integrated armrest on the inner side, and a black molded cup holder attached to the lower outer side.
  1 region

  x 0.02 · y 0.16 · w 0.45 · h 0.68 (high)
• Right booster overallHigh-back booster seat with contoured padded headrest and side wings, black fabric on headrest and upper panels, dark gray seat cushion, integrated inner armrest, and a black molded cup holder attached to the lower outer side.
  1 region

  x 0.53 · y 0.15 · w 0.45 · h 0.72 (high)
• Headrest shapeBoth boosters have tall, rounded headrests with pronounced side wings that curve forward toward the child's head.
  2 regions

  x 0.02 · y 0.10 · w 0.46 · h 0.22 (medium); x 0.53 · y 0.10 · w 0.45 · h 0.24 (medium)
• Seatbelt routingVehicle lap-shoulder seatbelts routed across each child's chest and lap, passing over the boosters' shoulder areas and anchored at the outboard sides.
  2 regions

  x 0.12 · y 0.32 · w 0.32 · h 0.52 (high); x 0.62 · y 0.28 · w 0.28 · h 0.56 (high)
• Cup holdersEach booster has a removable or fixed black plastic cup holder mounted on the outer lower side in front of the armrest.
  2 regions

  x 0.10 · y 0.74 · w 0.18 · h 0.12 (high); x 0.72 · y 0.74 · w 0.18 · h 0.12 (high)
• Fabric textureVisible woven fabric on seating surfaces with smooth padded panels on headrest and wings; left seat fabric appears slightly matte, right seat fabric appears matte and uniform.
  2 regions

  x 0.02 · y 0.28 · w 0.45 · h 0.48 (medium); x 0.53 · y 0.28 · w 0.45 · h 0.52 (medium)
• Lower shell and baseLight gray molded plastic lower shells and seat bases are visible beneath both boosters, forming the interface with the vehicle seat.
  2 regions

  x 0.02 · y 0.72 · w 0.46 · h 0.22 (high); x 0.53 · y 0.72 · w 0.45 · h 0.22 (high)
• Label or fabric tag on left headrestSmall vertical fabric tag attached to the outer side of the left headrest; text on the tag is not legible at this resolution.
  1 region

  x 0.26 · y 0.20 · w 0.04 · h 0.12 (medium)

Other

Image shows two children seated in the boosters inside a vehicle cabin, viewed from the front center aisle. Visible center console, vehicle rear seats, interior roof, window background, and flooring with track grooves.

• Children as propsTwo children are seated in the boosters, one on each seat, smiling and looking toward each other; their clothing and bodies partly obscure seat surfaces.
  2 regions

  x 0.04 · y 0.30 · w 0.36 · h 0.56 (high); x 0.56 · y 0.24 · w 0.36 · h 0.60 (high)
• Center console and cup wellsGray vehicle center console between the two boosters with molded cup wells, a recessed storage area, and two small red-release belt buckles visible at the front of each booster base.
  1 region

  x 0.34 · y 0.66 · w 0.32 · h 0.30 (high)
• Vehicle rear interiorRear passenger seats, headrests, and rear window are visible beyond the boosters; exterior scenery is visible through the rear window and is out of focus.
  1 region

  x 0.30 · y 0.06 · w 0.40 · h 0.28 (high)
• Floor mat and seat tracksDark rubberized honeycomb-pattern floor mat with visible seat track channels running front-to-back between the booster bases.
  1 region

  x 0.08 · y 0.88 · w 0.84 · h 0.12 (high)
• Lighting and image qualityEven, high-key interior lighting with soft shadows; image is sharp and colors are saturated.

Colors

magenta pink· left headrest and upper panels#E20273deep magenta· left seat cushion#9A246Dmatte black· right headrest and upper panels#0C0D12light gray· seat bases and lower shell#C3BCBAblack plastic· cup holders#1B1C1D

03

Product

Front-facing black booster car seat with tall winged headrest, integrated armrests and two visible cupholders; white 'diono' logos on headrest and right wing; small red trim stitching at belt path openings.

• Overall shapeHigh-back booster seat shown from the front with a rounded, contoured headrest featuring pronounced side wings and a continuous padded backrest flowing to the seat base.
  1 region

  x 0.05 · y 0.14 · w 0.66 · h 0.76 (high)
• Headrest wingsPadded headrest has large inward-curving side wings that wrap toward the center, forming lateral head support with visible seam lines.
  1 region

  x 0.17 · y 0.12 · w 0.45 · h 0.28 (high)
• Armrests and cupholdersIntegrated padded armrests descend from the seat sides; molded circular cupholder is visible on the lower right side of the seat (viewer left cupholder partially visible on left front).
  2 regions

  x 0.04 · y 0.66 · w 0.25 · h 0.19 (high); x 0.53 · y 0.67 · w 0.27 · h 0.18 (high)
• Seat basePadded seat cushion with contoured front edge and two visible lower anchors or guide loops near the front center edge.
  1 region

  x 0.14 · y 0.63 · w 0.58 · h 0.27 (high)
• Fabric and seamsSmooth black fabric cover with stitched seam lines forming panel sections on the headrest and backrest; foam padding visible through contours.
  1 region

  x 0.12 · y 0.13 · w 0.60 · h 0.61 (high)
• White logo on headrest“White 'diono' wordmark with circular device mark printed on the center upper headrest.”
  1 region

  x 0.36 · y 0.17 · w 0.14 · h 0.10 (high)
• White logo on right wing“Vertical white 'diono' wordmark printed on the outer face of the right-side headrest wing.”
  1 region

  x 0.62 · y 0.24 · w 0.09 · h 0.30 (high)
• Red trim at belt openingsSmall red stitched trim visible at the belt-path openings near the lower edges of the headrest/shoulder area on both sides.
  2 regions

  x 0.33 · y 0.30 · w 0.05 · h 0.03 (high); x 0.48 · y 0.44 · w 0.04 · h 0.03 (medium)

Other

Studio-style product shot on a white background with measurement callouts and a gray title band at the top; image cropped at top and bottom edges; even lighting with soft shadowing to the lower left.

• Title bannerGray horizontal banner at the top of the image containing large white text.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 0.14 (high)
• Top title text“Size Fit Guide”
  1 region

  x 0.22 · y 0.02 · w 0.57 · h 0.10 (high)
• Measurement calloutsThree gray dimensional labels and thin gray measurement lines placed around the seat reading '87.6cm', '57.2cm' and '41.9cm'.
  2 regions

  x 0.72 · y 0.26 · w 0.24 · h 0.49 (high); x 0.08 · y 0.74 · w 0.66 · h 0.20 (high)
• Measurement text 1“87.6cm”
  1 region

  x 0.77 · y 0.32 · w 0.17 · h 0.12 (high)
• Measurement text 2“57.2cm”
  1 region

  x 0.06 · y 0.82 · w 0.60 · h 0.12 (high)
• Measurement text 3“41.9cm”
  1 region

  x 0.66 · y 0.76 · w 0.24 · h 0.12 (high)
• Background and lightingPlain white background with soft studio lighting; subtle shadow under seat toward lower left and no visible props besides the seat.
• Image cropTop of the gray banner and bottom of the seat are both close to the image edges, indicating tight vertical crop.

Colors

matte black· fabric cover#110E0Cwhite· logo textsignal red· belt-path trimdark gray· molded cupholder#4D4946

04

05

Product

Right-side view of a black booster seat installed in a car with prominent padded headrest and side wings; the brand name 'diono' is printed vertically on the outer side wing.

• Headrest shapeTall, contoured padded headrest with pronounced rounded side wings that cradle the child's head; outer headrest surface is smooth fabric-covered padding.
  1 region

  x 0.07 · y 0.03 · w 0.45 · h 0.42 (high)
• Side wings and shoulder padsTall padded side wings extend down from the headrest to form elevated shoulder supports on both sides of the child; the outer right wing displays a vertical branded panel.
  2 regions

  x 0.02 · y 0.18 · w 0.30 · h 0.60 (high); x 0.28 · y 0.18 · w 0.34 · h 0.60 (medium)
• Brand text on side“diono”
  1 region

  x 0.03 · y 0.44 · w 0.12 · h 0.21 (high)
• Seat base and hip bolsterPadded booster seat base visible with rounded hip bolster on the outer edge covered in the same black fabric as the headrest and wings.
  1 region

  x 0.02 · y 0.65 · w 0.30 · h 0.20 (high)
• Visible seams and coverSmooth fabric cover with subtle seam lines around the headrest and side panels; fabric appears matte and tightly fitted over padding.

Other

Lifestyle shot showing the booster seat installed in a car with a child seated and wearing a vehicle shoulder belt; background shows car window with blurred exterior scenery and a cropped marketing overlay at the bottom.

• Child model seatedA child wearing a white polo shirt and blue jeans is seated in the booster seat with the car shoulder belt routed across the chest.
  1 region

  x 0.20 · y 0.24 · w 0.55 · h 0.64 (high)
• Car interior contextInterior of a car visible: light gray door panel, window frame, and headrest of the vehicle seat behind the booster seat.
  2 regions

  x 0.55 · y 0.00 · w 0.45 · h 0.60 (high); x 0.00 · y 0.00 · w 0.22 · h 0.50 (high)
• Window backgroundOut-of-focus outdoor greenery and buildings seen through the car window, providing a blurred background.
  1 region

  x 0.55 · y 0.04 · w 0.45 · h 0.36 (high)
• Bottom overlay text“Side impact protection”
  1 region

  x 0.00 · y 0.86 · w 1.00 · h 0.14 (high)
• Lighting and reflectionsEven diffuse lighting with soft shadows; slight reflection on window glass and soft highlight on the child's hair.

Colors

matte black· main fabric (headrest, side wings, base)#141515

06

Product

Front-facing view of a black high-back booster car seat showing headrest, shoulder wings, integrated belt routing slots, cup holders at the base, and a diagonal vehicle shoulder belt fitted across the seat.

• Overall geometryTall high-back booster seat with pronounced contoured headrest and side wings, a straight padded backrest, and a separate lower seating cushion.
  1 region

  x 0.16 · y 0.02 · w 0.68 · h 0.92 (high)
• Headrest and wingsPadded headrest with inward-curving lateral wings that extend down to the shoulder area; seams outline vertical panels on each wing.
  1 region

  x 0.22 · y 0.02 · w 0.56 · h 0.24 (high)
• Belt routing slotsTwo angled belt pass-through openings near the upper part of the backrest lined with small red trim at their inner edges.
  1 region

  x 0.33 · y 0.17 · w 0.34 · h 0.07 (high)
• Shoulder beltVehicle shoulder belt shown routed diagonally across the seat from upper-right to lower-left, textured gray webbing.
  1 region

  x 0.42 · y 0.18 · w 0.36 · h 0.52 (high)
• Lower seat cushionPadded lower seat cushion with a slightly raised front lip and visible seam lines separating seat panels.
  1 region

  x 0.20 · y 0.62 · w 0.60 · h 0.20 (high)
• Cup holdersTwo molded cup holder units attached to the left and right base; dark plastic with circular cutouts and built-in small compartments.
  2 regions

  x 0.04 · y 0.74 · w 0.20 · h 0.15 (high); x 0.76 · y 0.74 · w 0.20 · h 0.15 (high)
• Fabric and finishSmooth black fabric or upholstery with matte finish and visible stitched seams; padding appears uniformly covered.
  1 region

  x 0.20 · y 0.02 · w 0.60 · h 0.84 (high)
• Brand logo on headrest“White circular emblem above lowercase text diono printed on the center of the headrest.”
  1 region

  x 0.42 · y 0.06 · w 0.16 · h 0.10 (high)
• Right headrest tagSmall vertical fabric tag on the outer right headrest with light text or logo, partially visible.Partial
  1 region

  x 0.72 · y 0.07 · w 0.04 · h 0.10 (medium)
• Lower front iconsTwo small circular icons or emblems on the lower front face of the seat; graphical and not legible as text at this resolution.
  2 regions

  x 0.38 · y 0.78 · w 0.06 · h 0.06 (medium); x 0.56 · y 0.78 · w 0.06 · h 0.06 (medium)

Other

Studio-style product shot on a white background with centered composition and an overlaid marketing headline partially visible below the seat.

• Shot compositionProduct centered on a clean white background with even lighting and soft shadows removed; cropped text appears below the seat.
• Overlaid marketing text“Safe & easy shoulder and lap belt guides”

Colors

matte black· main upholstery#1C1C1Cmedium gray· shoulder belt webbing#4A4A4Abright red· belt slot trimbright white· embroidered logodark charcoal· cup holder plastic#4C4C4C

07

Product

Rear view of a child booster car seat showing the upper back, exposed central adjustment mechanism in orange, padded black fabric cover, and molded black plastic seatback shell. A blue arrow graphic indicates up/down adjustment on the headrest area.

• Overall viewRear-facing view of the booster seat showing the full seatback from near the top of the headrest down to the base of the seatback; seat is centered on a white background.
  1 region

  x 0.08 · y 0.03 · w 0.84 · h 0.92 (high)
• Headrest adjustment mechanismRectangular orange plastic adjustment block mounted at the top center of the seatback with visible slots and a central vertical orange connector; positioned behind the headrest padding.
  1 region

  x 0.43 · y 0.10 · w 0.14 · h 0.12 (high)
• Blue adjustment graphicTwo large solid blue arrows (one pointing up, one pointing down) printed or overlaid above and on the orange adjustment block with striped arrow tails indicating movement.
  1 region

  x 0.40 · y 0.05 · w 0.20 · h 0.16 (high)
• Padded headrestBlack padded headrest cover with visible stitching seam along the inner edge and rounded outer contour; shows slight crease where headrest meets adjustment block.
  1 region

  x 0.25 · y 0.02 · w 0.50 · h 0.18 (high)
• Seatback shellExposed central ribbed black plastic shell visible through a cutout in the fabric covering, showing vertical molded ribs and recessed channels.
  1 region

  x 0.38 · y 0.37 · w 0.24 · h 0.36 (high)
• Side padding and cutoutsThick black fabric side bolsters with rounded cutouts near the top where plastic hardware and belt paths are partially visible.
  2 regions

  x 0.16 · y 0.18 · w 0.22 · h 0.38 (high); x 0.62 · y 0.18 · w 0.22 · h 0.38 (high)
• Cup holders / side attachmentsSmall black cup-holder or attachment protrusions visible at the lower left and lower right outer edges of the seatback.
  2 regions

  x 0.02 · y 0.75 · w 0.12 · h 0.12 (medium); x 0.86 · y 0.75 · w 0.12 · h 0.12 (medium)

Other

Studio-style product shot on a white background with even lighting, minimal shadowing, and a faint ghosted grey overlay showing a higher headrest position above the visible headrest.

• Background and lightingPlain white background with even diffuse lighting and minimal soft shadow beneath the seat; image is high contrast and well lit.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 1.00 (high)
• Ghosted overlayFaded grey outline of the headrest positioned above the current headrest indicating adjustability; appears semi-transparent and centered above the product.
  1 region

  x 0.28 · y 0.00 · w 0.44 · h 0.12 (high)
• Caption text presenceTwo lines of black caption text centered below the product reading a short headline and subheadline; legible and part of the image composition.
  1 region

  x 0.18 · y 0.83 · w 0.64 · h 0.14 (high)
• Image crop and framingTop of the ghosted headrest is slightly cropped by the image top edge; product is vertically centered leaving space for caption below.

Colors

black· fabric cover and side bolsters#0E0D0Amatte black plastic· central seatback shell#211D1Bbright orange· headrest adjustment block#EC9B95medium blue· adjustment arrows graphic#1C79C2

08

Product

Close-up of a black fabric-covered booster seat showing a recessed black plastic cup holder being pulled out by a hand; textured cloth upholstery visible above the cup holder opening.

• Textured fabric upper panelBlack, slightly coarse textured fabric upholstery forms the upper portion of the image with curved sewn seams visible where the fabric folds.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 0.45 (high)
• Recessed cup holderMatte black plastic cup holder recessed into the seat base with a rounded interior contour and a rim being grasped at the front edge.
  1 region

  x 0.28 · y 0.44 · w 0.62 · h 0.34 (high)
• Hand pulling cup holderA left hand with pale skin and a long manicured fingernail is grasping the front rim of the cup holder, pulling it outward.
  1 region

  x 0.00 · y 0.55 · w 0.55 · h 0.35 (high)

Packaging

Marketing graphic and callout text visible below the product showing a green curved arrow and promotional headline about cup holders.

• Promotional headline“CUP HOLDERS”
  1 region

  x 0.22 · y 0.83 · w 0.56 · h 0.10 (high)
• Supporting copy“extend out when needed”
  1 region

  x 0.12 · y 0.91 · w 0.76 · h 0.09 (high)
• Green directional arrow graphicLarge green curved arrow graphic pointing right and down, positioned under the cup holder to indicate motion.
  1 region

  x 0.48 · y 0.62 · w 0.44 · h 0.30 (high)

Other

Studio-style image with a white background, soft even lighting, and slight shadowing; cropped composition focuses tightly on the cup holder area.

• Background and stagingPlain white background with no visible environment; product sits above a gray lower panel containing the marketing text.
  1 region

  x 0.00 · y 0.58 · w 1.00 · h 0.42 (high)
• Crop and framingTight close-up framing that crops parts of the seat and the hand, focusing on the front rim and interior of the cup holder.
• Lighting and shadowEven diffuse lighting with soft shadows under the cup holder rim and minimal specular highlights on the plastic.

Colors

matte black· fabric upholstery#0E0E0Ematte black plastic· cup holder plastic#1D1D1Dbright green· directional arrow graphicPackaging#6EB62Cmedium gray· lower text panelPackagingwhite· backgroundPackaging

09

Product

Front three-quarter view of a black high-back booster seat showing headrest, backrest, armrests, seat cushion, integrated cup holders, and visible fabric/textile cover with logo and red trim.

• High-back headrestWide padded headrest with contoured ear pads and a central narrow neck support section; fabric-covered with visible seam lines.
  1 region

  x 0.33 · y 0.02 · w 0.34 · h 0.28 (high)
• Brand logo on headrest“Lower-case word 'diono' and a rounded square emblem printed in white on the center of the headrest back panel.”
  1 region

  x 0.45 · y 0.08 · w 0.10 · h 0.10 (high)
• Side wings and armrestsTall contoured side wings extending from headrest to seat with integrated padded armrests that curve outward at the front.
  2 regions

  x 0.60 · y 0.18 · w 0.23 · h 0.58 (high); x 0.23 · y 0.22 · w 0.24 · h 0.56 (high)
• Seat cushion shapeThick padded cushion with raised outer edges and a recessed central seating area; seams define front lip and inner panel.
  1 region

  x 0.28 · y 0.52 · w 0.44 · h 0.30 (high)
• Cup holdersTwo molded cup holders that extend from the lower sides of the seat, visible in the open position on both sides.
  2 regions

  x 0.08 · y 0.76 · w 0.14 · h 0.12 (high); x 0.74 · y 0.74 · w 0.16 · h 0.12 (high)
• Small red trimThin red fabric piping visible at several seam points including lower headrest cutout and near the seat edge.
  2 regions

  x 0.48 · y 0.29 · w 0.06 · h 0.04 (high); x 0.40 · y 0.67 · w 0.06 · h 0.06 (medium)
• Side panel text“Lower-case word 'diono' printed vertically in white on the outer side wing.”
  1 region

  x 0.69 · y 0.34 · w 0.09 · h 0.33 (high)
• Front seat iconsTwo small white circular icons printed on the front lower seat face near the center, each inside a small round badge.
  2 regions

  x 0.40 · y 0.78 · w 0.06 · h 0.05 (medium); x 0.54 · y 0.78 · w 0.06 · h 0.05 (medium)
• Fabric cover and seamsSmooth dark textile cover with visible stitched paneling and seam lines on headrest, backrest, and seat surfaces.

Other

White studio background with annotated callouts and gray pointer lines pointing to product features; cropped image showing most of the seat and several overlay text labels.

• Callout text top left“Adjustable headrest”
  1 region

  x 0.02 · y 0.03 · w 0.33 · h 0.16 (high)
• Callout text right top“Open-loop belt guide shelp”
  1 region

  x 0.70 · y 0.02 · w 0.28 · h 0.14 (high)
• Callout image insetSmall inset photograph showing a close-up of a belt guide with red trim, framed by a gray border.
  1 region

  x 0.73 · y 0.18 · w 0.18 · h 0.12 (high)
• Callout text left middle“Machine washable seat pad”
  1 region

  x 0.02 · y 0.28 · w 0.34 · h 0.18 (high)
• Callout text lower left“LATCH connectors”
  1 region

  x 0.02 · y 0.72 · w 0.30 · h 0.18 (high)
• Callout text lower right“Extend the cup holders”
  1 region

  x 0.64 · y 0.70 · w 0.34 · h 0.20 (high)
• Pointer lines and gray nodesGray connector lines with circular gray nodes point from text callouts to corresponding product areas; nodes overlay product surface at target points.
• Image crop and lightingEven studio lighting with soft shadows under the seat; top and right edges of the product are fully visible while lower left is slightly cropped.

Colors

matte black· fabric cover#120E0Dwhite· logo and front iconsaccent red· trim pipingmedium gray plastic· cup holders#818181

• amazon.com

  high

  Diono Cambria LE, 2-in-1 Belt Positioning Booster Seat, Backless and High-Back Booster seat for Children from 40—120 lb, 17" Wide, 6 Headrest Positions, Lightweight with Latch, Black

  Diono

  View listing →