New MyPet Universal Pet Gate, 26–42 Inch (Gray)

Adjustable, pressure-mounted pet gate (26–42" wide, 26" tall) with rounded plastic edges; installs without tools, converts to a swing gate with included hardware, and is lightweight and portable for indoor use or travel. Suitable for small to medium pets.

Pressure-mounted setup that installs without tools; adjustable width 26"–42"; 26" tall; multi-position lock handle; rounded plastic edges to prevent pinching; convertible to swing gate with included hardware; lightweight and portable for repositioning or travel.

Color

Gray · gray

Material

Plastic

Style

sustainable, travel-friendly

Occasion

everyday, travel

Gender

unisex

Condition

new

Category

Animals & Pet Supplies > Pet Supplies > Pet Containment Systems

01

Product

Front-facing section of a plastic pet gate shown upright. Visible features include a rectangular outer frame, two large perforated lattice panels with repeating teardrop-shaped openings, a horizontal solid reinforcement bar across the middle, and a mechanical latch lever on the right side.

• Outer frameRectangular molded plastic frame with rounded outer corners and internal vertical ribs visible along left and right stiles.
  1 region

  x 0.05 · y 0.02 · w 0.90 · h 0.96 (high)
• Perforated panelsTwo large square-ish panels filled with a repeating teardrop/leaf-shaped lattice of cutouts; the pattern is identical on upper and lower panels.
  1 region

  x 0.14 · y 0.10 · w 0.72 · h 0.79 (high)
• Horizontal reinforcement barSolid horizontal band across the gate at roughly mid-height; it is flush with the lattice panels and runs between the stiles.
  1 region

  x 0.14 · y 0.42 · w 0.72 · h 0.13 (high)
• Latch leverLever-style latch assembly mounted on the right side of the middle reinforcement band; lever arm is triangular with a circular pivot plate.
  1 region

  x 0.66 · y 0.37 · w 0.19 · h 0.16 (high)
• Top and bottom sliding adjustment tracksNarrow recessed horizontal tracks or channels visible at the very top and bottom inside the frame, suggesting adjustable mounting hardware location.
  2 regions

  x 0.12 · y 0.01 · w 0.76 · h 0.06 (medium); x 0.12 · y 0.93 · w 0.76 · h 0.06 (medium)

Other

Studio-style product photo on a white background with a small dog prop positioned in front of the gate; even lighting with soft shadows.

• Dog propSmall fluffy dog (Pomeranian or similar) sitting in front of the lower left of the gate, partially occluding the lower lattice.
  1 region

  x 0.06 · y 0.60 · w 0.42 · h 0.36 (high)
• Background and lightingPlain white background with soft, even lighting and minimal visible shadow under the dog and along the bottom edge of the gate.
• Shot compositionCentered, slightly cropped portrait orientation showing the full width and most of the height of the gate; top and bottom frame edges are visible.

Colors

light gray· frame and panels#D9D5D5

02

Product

A freestanding plastic pet gate installed in a doorway: rectangular, light-gray grid panels with diamond-shaped cutouts, a central vertical support, and a sliding latch mechanism near the top center. The lower front of the gate is partially occluded by a small dog.

• Overall panel geometryRectangular two-panel plastic gate occupying the doorway opening with a visible seam/vertical support where the two panels meet in the center; each panel contains repeating rounded-diamond cutouts arranged in a grid.
  1 region

  x 0.06 · y 0.12 · w 0.88 · h 0.64 (high)
• Central vertical supportA solid vertical support bar runs down the middle of the gate, thicker than the grid framing and visually dividing the gate into left and right halves.
  1 region

  x 0.47 · y 0.20 · w 0.06 · h 0.58 (high)
• Top sliding latchA small sliding latch mechanism is mounted along the top rail slightly left of center; it appears as a rectangular slider in a narrow horizontal slot.
  1 region

  x 0.41 · y 0.06 · w 0.18 · h 0.06 (medium)
• Lower horizontal reinforcementA solid horizontal reinforcement bar runs across the gate near the lower third, lacking cutouts and forming a continuous strip between the panels.
  1 region

  x 0.10 · y 0.46 · w 0.80 · h 0.12 (high)
• Mounting brackets in doorwayRectangular mounting bracket pieces are visible on both left and right vertical frame edges where the gate meets the door jambs.
  2 regions

  x 0.02 · y 0.16 · w 0.06 · h 0.60 (medium); x 0.92 · y 0.16 · w 0.06 · h 0.62 (medium)
• Partial occlusion by petThe bottom-right portion of the gate is partially covered by a small light-brown dog lying on the floor; the dog's head and body overlap the gate's lower front edge.
  1 region

  x 0.32 · y 0.62 · w 0.64 · h 0.36 (high)

Other

Indoor lifestyle scene showing the gate installed in a doorway with a hardwood floor, a small dog in front of the gate, and a kitchen visible beyond the gate. Soft even lighting with mild reflections on the floor.

• Dog propA small curly-haired light-brown dog is lying on the floor in front of the gate, facing the camera; the dog occupies the lower-right area of the image.
  1 region

  x 0.30 · y 0.62 · w 0.66 · h 0.36 (high)
• Background interiorA kitchen or cabinetry area is visible through the gate including lower cabinet doors and a stainless appliance partially visible at top-right behind the gate.
  1 region

  x 0.36 · y 0.02 · w 0.56 · h 0.36 (high)
• Floor surfaceMedium-toned hardwood flooring with visible grain and board seams extends across the foreground and through the gate into the background.
  1 region

  x 0.00 · y 0.70 · w 1.00 · h 0.30 (high)
• Lighting and reflectionsSoft, diffuse indoor lighting with mild specular reflections on the floor and slight highlight on the top rail of the gate.

Colors

light gray· gate body#ADADB2

03

Product

Frontal view of a light-gray plastic adjustable pet gate panel with diamond-pattern mesh, a horizontal reinforcement bar with a lever-style latch, and telescoping top and bottom rails for width adjustment.

• Overall geometryRectangular gate panel shown from the front with a narrow outer frame and an inset central mesh section containing repeated diamond/teardrop cutouts.
  1 region

  x 0.08 · y 0.02 · w 0.84 · h 0.86 (high)
• Material and finishSingle-piece molded plastic appearance with a smooth, matte finish visible on frame and mesh elements.
  1 region

  x 0.08 · y 0.02 · w 0.84 · h 0.86 (high)
• Mesh patternRepeating diamond/teardrop-shaped perforations arranged in a grid across the central panels above and below the horizontal reinforcement.
  1 region

  x 0.18 · y 0.12 · w 0.64 · h 0.62 (high)
• Horizontal reinforcement and latchWide horizontal solid bar across the mid-height of the gate with an attached lever-style latch handle that pivots and a small oval latch opening beside it.
  1 region

  x 0.32 · y 0.40 · w 0.46 · h 0.14 (high)
• Top and bottom adjustable railsTop and bottom rails show elongated recessed tracks and end caps suggesting telescoping adjustment for width.
  2 regions

  x 0.14 · y 0.00 · w 0.72 · h 0.10 (medium); x 0.14 · y 0.78 · w 0.72 · h 0.10 (medium)
• Side frame ribs and mounting clipsVertical side frame has internal vertical ribs and visible white plastic mounting clips or knobs along the right and left edges.
  2 regions

  x 0.86 · y 0.06 · w 0.12 · h 0.80 (medium); x 0.02 · y 0.06 · w 0.12 · h 0.80 (medium)

Packaging

Lower infographic panel visible with teal background and several legible headings and short descriptors about material, color, and mounting.

• Heading text at top“Adjusts to Fit Openings 26" - 42"”
  1 region

  x 0.18 · y 0.00 · w 0.64 · h 0.10 (high)
• Dimension callout“26"”
  1 region

  x 0.03 · y 0.08 · w 0.12 · h 0.16 (high)
• Material label“Material:”
  1 region

  x 0.00 · y 0.80 · w 0.33 · h 0.08 (high)
• Material short descriptor“Durable Plastic”
  1 region

  x 0.00 · y 0.88 · w 0.33 · h 0.10 (high)
• Color label“Color:”
  1 region

  x 0.33 · y 0.80 · w 0.34 · h 0.08 (high)
• Color descriptor“Light Gray”
  1 region

  x 0.33 · y 0.88 · w 0.34 · h 0.10 (high)
• Mounting label“Mounting:”
  1 region

  x 0.67 · y 0.80 · w 0.33 · h 0.08 (high)
• Mounting callout“2-in-1”
  1 region

  x 0.72 · y 0.86 · w 0.18 · h 0.14 (high)
• Mounting descriptor (partial)“Pressure or Hardware”Partial
  1 region

  x 0.55 · y 0.94 · w 0.45 · h 0.06 (medium)

Other

Cropped studio-style product image with white background and an teal infographic strip across the bottom; top and left/right arrows in orange indicate dimensions.

• Shot compositionGate centered in frame with tight crop; white background and soft studio lighting minimize shadows.
• Orange dimension arrowsLarge orange double-headed horizontal arrow at top and vertical arrow at left indicating range and height, with numeric 26" near the vertical arrow.
  2 regions

  x 0.12 · y 0.02 · w 0.76 · h 0.12 (high); x 0.00 · y 0.08 · w 0.06 · h 0.64 (medium)
• Lighting and reflectionsEven diffuse lighting with faint soft shadows and slight specular highlights along raised frame edges.

Colors

Light gray· gate frame and mesh#D9D5D5Teal green· infographic background stripPackaging#027973

04

Product

White/very light gray plastic pet gate composed of hinged panels with diamond lattice inserts; shown installed both as a low room divider and as a swing gate at a stair top. Visible components include a horizontal handle/lock assembly, hinge connectors, and molded frame edges.

• Overall geometryTwo-panel folding gate formed from rectilinear molded frames with inset diamond-lattice panels; each panel has a rectangular solid outer frame and an inner grid of rounded diamond openings.
  2 regions

  x 0.03 · y 0.08 · w 0.47 · h 0.48 (high); x 0.53 · y 0.08 · w 0.44 · h 0.60 (high)
• Frame finish and materialSmooth molded plastic frame and lattice in a uniform light gray / off-white finish with slightly rounded corners and ribbed reinforcement lines visible on frame edges.
  1 region

  x 0.02 · y 0.06 · w 0.95 · h 0.65 (high)
• Handle and latch assemblyHorizontal handle and latch bar located near the middle-height of the left-side gate panel (visible on left image); the latch is an elongated molded piece mounted on the frame.
  1 region

  x 0.18 · y 0.42 · w 0.24 · h 0.10 (high)
• Hinges and connector pinsVertical hinge connector sections visible where panels join and at the outer frame edges, appearing as recessed rounded posts and slots in the molded frame.
  2 regions

  x 0.46 · y 0.12 · w 0.04 · h 0.54 (medium); x 0.92 · y 0.20 · w 0.05 · h 0.60 (medium)
• Orientation modes shownLeft side of image shows gate installed across a doorway as a low room divider set flush between door jambs; right side shows the gate used as a swing gate at a stair opening with one panel swung open and held by a person.
  2 regions

  x 0.03 · y 0.08 · w 0.47 · h 0.48 (high); x 0.53 · y 0.08 · w 0.44 · h 0.60 (high)
• Small printed label on gateRectangular printed instruction or warning label adhered to the lower horizontal frame on the left gate panel; text is too small to read at this resolution.
  1 region

  x 0.10 · y 0.49 · w 0.20 · h 0.08 (medium)

Other

Lifestyle scene showing two dogs and a person interacting with the gate in a home interior; teal marketing banner with large text occupies the bottom portion of the image.

• Person interacting with gateWoman wearing an orange-red cardigan and dark jeans is shown on the right side holding the top of the swung-open gate panel and smiling while a dog stands next to her.
  1 region

  x 0.62 · y 0.05 · w 0.30 · h 0.55 (high)
• Large dog on leftA large reddish-brown dog with white markings is lying on the floor in front of the left-installed gate facing slightly right.
  1 region

  x 0.04 · y 0.47 · w 0.40 · h 0.33 (high)
• Large dog on rightA second large dog with white and gray fur and darker patches is standing behind the right gate panel near the woman.
  1 region

  x 0.60 · y 0.38 · w 0.20 · h 0.35 (high)
• Interior backgroundIndoor hallway and stair top setting with wood floors, built-in bench with green pillows on the left, and framed artwork and a plant on the right.
  1 region

  x 0.02 · y 0.02 · w 0.96 · h 0.60 (high)
• Marketing headline text block“Large white headline text '2-in-1 Gate' centered on a teal banner that fills the bottom portion of the image.”
  1 region

  x 0.00 · y 0.70 · w 1.00 · h 0.30 (high)
• Left column descriptive text“Pressure-mount between rooms and bottom of stairs”
  1 region

  x 0.02 · y 0.78 · w 0.48 · h 0.18 (high)
• Center connecting text“or”
  1 region

  x 0.46 · y 0.82 · w 0.08 · h 0.10 (high)
• Right column descriptive text“Hardware-mount as swing gate at top of stairs (tools required)”
  1 region

  x 0.52 · y 0.78 · w 0.46 · h 0.18 (high)

Colors

light gray· frame and lattice#E4EAEC

05

Product

A freestanding gray plastic pet gate shown installed in a doorway with a woman pressing a central lever; gate has a repeating diamond lattice panel, a horizontal reinforcement bar, and a pivoting latch/handle assembly on the front face.

• Gate lattice panelFront-facing panel made from injection-molded plastic with a repeating diamond/rounded-square lattice pattern covering most of the gate surface.
  1 region

  x 0.08 · y 0.30 · w 0.84 · h 0.54 (high)
• Horizontal reinforcement barSolid horizontal rectangular bar spans the gate about one third from the top, forming a mounting area for the latch assembly.
  1 region

  x 0.12 · y 0.48 · w 0.76 · h 0.10 (high)
• Latch and leverPivoting metal/ plastic lever mounted to the horizontal bar with a slotted adjustment area beneath it; a hand is holding the lever in a downward-turning position.
  1 region

  x 0.50 · y 0.52 · w 0.22 · h 0.20 (high)
• Top railRounded top rail with a slightly raised grip surface visible where the woman places her left hand.
  1 region

  x 0.10 · y 0.36 · w 0.60 · h 0.08 (high)
• Orange directional graphicCurved orange arrow graphic printed or overlaid pointing down and to the right indicating lever rotation.
  1 region

  x 0.42 · y 0.58 · w 0.18 · h 0.14 (high)

Packaging

A teal promotional panel at the bottom of the image contains large white headline text and additional white copy; text is part of product marketing art, not a physical box.

• Headline text“Easy-Grip Handle”
  1 region

  x 0.00 · y 0.84 · w 1.00 · h 0.16 (high)
• Supporting copy line 1“Allows you to quickly and easily pressure-”
  1 region

  x 0.03 · y 0.91 · w 0.94 · h 0.06 (high)
• Supporting copy line 2“mount gate with no tools”
  1 region

  x 0.03 · y 0.96 · w 0.94 · h 0.04 (high)

Other

Lifestyle scene in a kitchen with a woman operating the gate; stainless appliances and cabinetry are visible, lighting is even and studio-like, and the image is cropped to include a promotional bottom panel.

• Person operating gateWoman leaning over the gate, using both hands: left hand on the top rail and right hand turning the latch; shown from torso up to knees.
  1 region

  x 0.32 · y 0.05 · w 0.36 · h 0.65 (high)
• Kitchen backgroundInterior kitchen scene with white cabinets, stainless steel refrigerator and microwave, and a stove visible behind the subject.
  2 regions

  x 0.56 · y 0.00 · w 0.44 · h 0.40 (high); x 0.12 · y 0.00 · w 0.18 · h 0.56 (high)
• Shot compositionFrontal lifestyle shot centered on the gate and operator; lower portion of image replaced by a teal marketing panel, cropping the scene.

Colors

light gray· gate plastic#CBCACCcool gray· latch lever#A6A9ACteal green· promotional panel backgroundPackaging#01796Ebright orange· directional graphic arrow

06

Product

Close-up of the pet gate's vertical side frame showing the patterned infill panel, hinge/peg, and a small round bumper adjacent to a wall cup.

• Frame profileVertical outer frame of the gate made from light gray molded plastic with a rounded outer edge and internal vertical reinforcement ribs.
  1 region

  x 0.29 · y 0.03 · w 0.27 · h 0.92 (high)
• Infill panel patternDiamond/teardrop lattice pattern in the gate infill consisting of repeating rounded diamond openings in the same light gray plastic.
  1 region

  x 0.46 · y 0.12 · w 0.29 · h 0.68 (high)
• Round bumper/pegSmall circular peg or bumper mounted on the gate frame, pale beige in color, projecting outward and aligned roughly with the wall cup.
  1 region

  x 0.33 · y 0.28 · w 0.06 · h 0.08 (high)
• Bottom railHorizontal bottom rail in the same light gray plastic with a flat base that sits on the floor and a small integrated lip facing the room.
  1 region

  x 0.47 · y 0.74 · w 0.36 · h 0.15 (high)

Packaging

Graphic marketing panels overlay the image; teal panels and large white headings describe features.

• Headline text top“Secure Pressure Mount”
  1 region

  x 0.52 · y 0.02 · w 0.46 · h 0.24 (high)
• Supporting claim top“Wall cups provide extra security & holding power.”
  1 region

  x 0.52 · y 0.20 · w 0.46 · h 0.18 (high)
• Orange horizontal bandWide horizontal orange band crosses the image separating the top and bottom graphic sections.
  1 region

  x 0.00 · y 0.45 · w 1.00 · h 0.08 (high)
• Bottom headline“Rubber Bumpers”
  1 region

  x 0.01 · y 0.52 · w 0.48 · h 0.20 (high)
• Bottom supporting claim“Accommodate baseboards up to 4" high.”
  1 region

  x 0.01 · y 0.72 · w 0.48 · h 0.20 (high)
• Orange up-down arrowTall orange double-headed vertical arrow indicating height accommodation placed beside the gate bottom.
  1 region

  x 0.86 · y 0.62 · w 0.14 · h 0.33 (high)

Other

Indoor staged photo showing gate installed against a painted wall and wood floor with teal graphic overlays on the right and left.

• Wall cupSmall gray wall-mounted cup on the left wall positioned to receive the gate peg; cup has a shallow curved front face.
  1 region

  x 0.13 · y 0.22 · w 0.07 · h 0.13 (high)
• Flooring and baseboardMedium brown hardwood floor with white baseboard; gate bottom sits on the floor adjacent to the baseboard.
  1 region

  x 0.46 · y 0.80 · w 0.49 · h 0.18 (high)
• Shot compositionComposite product photo with the actual gate shown on the left and center, and teal graphic panels with white text covering the right and left thirds of the image.
• Image overlays and croppingTeal graphic panels and an orange band overlay parts of the product photo; right edge of the gate is cropped by the graphic.

Colors

light gray· gate frame and infill#BBBCC2pale beige· round bumper/peg#C1C2C2deep teal· graphic background panelsPackagingbright orange· accent band and arrowPackaging#FFA401white· textPackaging#D8D4D3

• amazon.com

  high

  MYPET Universal Pet Gate: 26” - 42” Wide Dog Gate for Doorways with Pressure Fit or Swinging Door Hardware Mounting Types Included: 26" Tall; Gray

  MYPET

  View listing →
• petsupermarket.com

  high

  Mypet Universal Petgate Pre-Assembled Dog Gate, Light Gray, 26"

  MYPET

  View listing →
• cheshirehorse.com

  high

  North States MyPet Universal Pet Gate

  MYPET

  View listing →
• scheels.com

  high

  MyPet Universal Petgate

  MYPET

  View listing →
• acehardware.com

  medium

  North States 26 in. H X 26-42 in. W Plastic Pet Gate Mfr# 8625

  MYPET

  View listing →