Evenflo Pivot Modular Travel System (Casual Gray)

Product

A black/gray infant stroller (left) with matching detachable infant car seat (right). The stroller shows canopy, padded seat with five-point harness, front bumper bar, tubular frame, storage basket, cup holder, and a four-wheel base with larger rear wheels. The car seat shows a molded black shell, fabric liner, integrated canopy, carrier handle, and visible yellow warning label on the interior side.

• Stroller canopyLarge hooded canopy in a very dark gray or black fabric covering the stroller seat opening and creating a deep recessed seating area.
  1 region

  x 0.08 · y 0.03 · w 0.42 · h 0.33 (high)
• Seat fabric and paddingSeat liner and cushion in a medium gray textured fabric with subtle patterning visible on the seat base and back, including molded padding for the head and sides.
  1 region

  x 0.16 · y 0.20 · w 0.28 · h 0.30 (high)
• Five-point harness buckleBlack five-point harness straps with a central buckle visible across the seat front.
  1 region

  x 0.26 · y 0.34 · w 0.14 · h 0.10 (high)
• Front bumper barCurved padded front bumper/safety bar spanning the seat opening with a small printed logo on the front-facing top center.
  1 region

  x 0.21 · y 0.27 · w 0.22 · h 0.07 (high)
• Frame and handleMatte black tubular stroller frame with a curved push handle extending rearward and a cup-holder mounted on the left side of the handle area.
  1 region

  x 0.03 · y 0.10 · w 0.22 · h 0.40 (high)
• Storage basketOpen fabric storage basket beneath the stroller seat spanning between the frame rails.
  1 region

  x 0.18 · y 0.56 · w 0.32 · h 0.20 (high)
• Front swivel wheelsTwo smaller black swivel front wheels mounted on short forks with visible tread detail.
  1 region

  x 0.28 · y 0.70 · w 0.14 · h 0.20 (high)
• Rear wheelsLarger black rear wheels with visible spokes and tread located at the back of the stroller frame.
  1 region

  x 0.03 · y 0.68 · w 0.18 · h 0.24 (high)
• Car seat shellSeparate infant car seat with a glossy black molded plastic shell and an integrated curved black carrier handle positioned upright.
  1 region

  x 0.64 · y 0.42 · w 0.32 · h 0.40 (high)
• Car seat fabric linerMedium gray padded fabric liner in the car seat with visible textured pattern matching the stroller seat material.
  1 region

  x 0.68 · y 0.50 · w 0.24 · h 0.28 (high)
• Car seat warning labelRectangular yellow safety/warning label affixed to the inner sidewall of the car seat; text on the label is not legible at this resolution.
  1 region

  x 0.78 · y 0.54 · w 0.06 · h 0.12 (high)
• Product logo on bumper bar“evenflo”
  1 region

  x 0.29 · y 0.28 · w 0.08 · h 0.04 (medium)
• Product logo on car seat head area“evenflo”
  1 region

  x 0.73 · y 0.47 · w 0.06 · h 0.04 (medium)

Other

Studio-style product shot on a white background with soft shadow/reflection beneath the stroller and car seat; even lighting with subtle specular highlights on plastic parts.

• Shot compositionTwo-piece product arrangement with the stroller on the left and the car seat on the right, both fully visible and centered on a white seamless background.
• Reflection and shadowSoft mirrored reflection of the stroller and car seat visible on the lower portion of the image fading to white at the bottom edge.
  1 region

  x 0.10 · y 0.82 · w 0.80 · h 0.18 (high)
• Lighting and highlightsEven diffuse studio lighting with specular highlights on black plastic frame and shell surfaces indicating glossy finishes.

Colors

Product

Side view of a modular stroller in bassinet configuration showing a fabric bassinet and canopy mounted on a metal frame with three visible wheels and a mesh storage basket underneath.

• ConfigurationBassinet mode with a rectangular fabric bassinet mounted parallel to the frame and a foldable canopy above.
  1 region

  x 0.10 · y 0.12 · w 0.75 · h 0.42 (high)
• Canopy shapeTriangular/arched canopy with a single visible seam forming a peaked top and smooth fabric finish.
  1 region

  x 0.08 · y 0.05 · w 0.50 · h 0.26 (high)
• Frame geometryAngled tubular metal frame forming an X-like support under the bassinet with visible pivot joints where the frame meets the bassinet supports.
  1 region

  x 0.28 · y 0.34 · w 0.44 · h 0.48 (high)
• Handle and hingeShort upright handle/stem with a textured grip visible near the bassinet attachment point and a circular hinge joint on the frame.
  1 region

  x 0.48 · y 0.20 · w 0.18 · h 0.18 (medium)
• WheelsThree visible wheels: two larger rear wheels with multi-spoke plastic hubs and one smaller swivel front wheel with a similar spoke pattern.
  2 regions

  x 0.07 · y 0.68 · w 0.28 · h 0.28 (high); x 0.60 · y 0.68 · w 0.32 · h 0.28 (high)
• Under-seat storageRectangular mesh storage basket with light-colored mesh panel and solid fabric edges attached under the frame.
  1 region

  x 0.26 · y 0.56 · w 0.46 · h 0.22 (high)
• Fabric finishSmooth matte fabric used for bassinet walls and canopy, with visible stitching lines at seams and edge bindings.
  1 region

  x 0.10 · y 0.12 · w 0.75 · h 0.42 (high)
• Fastener detailSmall strap with buckle or clip visible on the side of the bassinet near the rear end.
  1 region

  x 0.62 · y 0.36 · w 0.12 · h 0.12 (medium)

Other

Studio product shot on a white background with a faint reflection below the wheels and even lighting from the front.

• Background and reflectionPlain white background with a subtle mirrored reflection of the stroller visible directly beneath the wheels and lower frame.
  1 region

  x 0.00 · y 0.78 · w 1.00 · h 0.18 (high)
• Shot compositionSide-on profile view centered in frame, product fully visible and isolated from any props.
• LightingEven diffuse frontal lighting with minimal harsh shadows, producing uniform exposure across fabric and frame.

Colors

Product

Six visible stroller configurations assembled on the same metal frame: bassinet, infant car seat, and toddler seat shown in both rear-facing and forward-facing orientations. Shared components visible include a Z-shaped black metal frame, four wheels, a lower mesh storage basket, adjustable handlebar, and removable fabric canopies.

• Multiple configurationsImage shows six separate assembled configurations arranged in a 3x2 grid: each column appears to pair a bassinet, an infant car seat, and a toddler seat on the same frame in different orientations.
• Frame geometrySingle Z-shaped metal frame visible under every configuration with an angled main tube rising from the rear wheels to the handle and a lower tube forming the support above the front wheels.
  1 region

  x 0.05 · y 0.18 · w 0.90 · h 0.68 (high)
• WheelsFour spoked wheels visible on each assembly; front wheels are smaller and appear to swivel, rear wheels are larger and fixed to the frame.
  1 region

  x 0.06 · y 0.62 · w 0.88 · h 0.33 (high)
• Lower storage basketRectangular mesh-lined storage basket attached between the frame tubes under the seat area, visible in all six assemblies as a light gray panel.
  1 region

  x 0.12 · y 0.55 · w 0.76 · h 0.22 (high)
• HandlebarSingle horizontal handlebar with a padded grip located at the rear of the frame, visible in all configurations; grip appears dark and textured.
  2 regions

  x 0.06 · y 0.03 · w 0.42 · h 0.12 (medium); x 0.52 · y 0.03 · w 0.42 · h 0.12 (medium)
• BassinetA rectangular bassinet with tall fabric walls and an integrated canopy is shown attached to the frame in at least two positions (left column, top and bottom), with a flat horizontal interior profile.
  2 regions

  x 0.02 · y 0.02 · w 0.30 · h 0.42 (high); x 0.02 · y 0.50 · w 0.30 · h 0.42 (high)
• Infant car seatAn infant car seat with a curved shell and integrated canopy is shown in the center column (top and bottom) mounted on the frame, with visible yellow warning label area on the shell's side.
  2 regions

  x 0.36 · y 0.06 · w 0.26 · h 0.34 (high); x 0.36 · y 0.50 · w 0.26 · h 0.34 (high)
• Toddler seatA padded toddler seat with an adjustable canopy and recline is shown in the right column (top and bottom), attached in forward-facing orientation in the top-right and rear-facing in the bottom-right.
  2 regions

  x 0.72 · y 0.06 · w 0.26 · h 0.40 (high); x 0.72 · y 0.50 · w 0.26 · h 0.40 (high)
• CanopiesEach seating component has a fabric canopy; canopies are angular and fold over the seating area, appearing uniformly dark across all configurations.
  1 region

  x 0.02 · y 0.00 · w 0.98 · h 0.52 (medium)
• Warning label areaSmall yellow label or decal visible on the side of the infant car seat shells in the center column, providing a color contrast against the dark shell.
  2 regions

  x 0.45 · y 0.20 · w 0.06 · h 0.08 (high); x 0.45 · y 0.64 · w 0.06 · h 0.08 (high)

Other

White studio background with grid composition showing reflections beneath each assembled configuration and faint gray plus signs between column groupings. Even lighting with soft shadows beneath wheels.

• Shot compositionSix-product grid on a white background, three across and two down, with small gray plus signs centered between column elements.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 1.00 (high)
• Reflections and shadowsSoft mirrored reflections of each assembly visible on the white surface directly beneath the wheels and light drop shadows for depth.
  1 region

  x 0.05 · y 0.72 · w 0.90 · h 0.26 (high)
• LightingEven diffuse studio lighting with minimal harsh highlights producing low-contrast shadows.

Colors