Evenflo GoTime No‑Back Booster Car Seat — Blue Astro, backless booster for 40–120 lb kids with 2 cup holders

We confirm this GoTime No‑Back Booster meets all applicable U.S. Federal Motor Vehicle Safety Standard No. 213 requirements. FMVSS 213 currently requires frontal-impact testing but has no side‑impact provision; Evenflo states it performs additional internal side‑impact testing and that its car seats meet Evenflo’s side‑impact standards (Evenflo also tests seats to roughly 2× FMVSS energy levels). [1] [2]

Evenflo GoTime user manual (U.S. regulatory notice) and Evenflo Safety & Technology page (side‑impact testing & 2× FMVSS statement).

We list this booster’s assembled height as 7.88 inches. That means it raises a child roughly 7.9 inches from the vehicle seat to the top of the booster cushion. [1]

product_dimensions / product_description (Assembled height listed as 7.88" H)

Yes — we include a removable, adjustable shoulder‑belt clip with this GoTime booster: thread the looped end through the anchor point on the back of the base and use the adjustment strap to position the clip at or slightly above your child’s shoulder. The owner’s manual explains the clip is intended for use with vehicle lap/shoulder belts (including belts with sliding latch plates) but warns against use with door‑mounted belts or lap/shoulder belts that have two retractors; if the vehicle shoulder belt already fits correctly you do not need to use the clip. [1][2]

Owner's manual 'Using the Shoulder Belt Clip' and Evenflo product page (GoTime No Back Booster Car Seat)

We do not include LATCH or storage anchors on the GoTime No‑Back booster, and the product specs/manual do not list a non‑slip base — this model installs with the vehicle lap/shoulder seat belt and uses the included shoulder‑belt clip for belt positioning. The owner’s manual and specs state the booster must be secured with the vehicle seat belt when not occupied, so the lightweight (about 3.0 lb) base can shift on the vehicle seat if left unbuckled. [1][2]

product_description / owner’s manual

Yes — the removable seat pad for this Evenflo GoTime No‑Back Booster is machine‑washable; wash it separately in cold water on a delicate/gentle cycle with mild detergent. Tumble dry on low heat for about 10–15 minutes then remove immediately (or hang/air dry); wipe the plastic shell with a damp cloth and mild soap and do not machine‑wash any webbing or hardware. [1][2]

Evenflo care & cleaning guidance — GoTime/Booster product manual and Evenflo FAQ

This Evenflo GoTime No‑Back Booster is not approved for use on airplanes — the product page does not show an aircraft-certification label and backless boosters are not permitted by FAA guidance during taxi, takeoff, or landing. The FAA requires a permanent label reading “This restraint is certified for use in motor vehicles and aircraft” for a seat to be used on a plane; if you want a child restraint for flight, choose an FAA‑certified harnessed car seat or use the aircraft seat belt per airline policy. [1][2]

Evenflo product page; FAA guidance 'Flying with Children' and FAA child safety seat tips

We recommend replacing this Evenflo GoTime booster six years after its date of manufacture — Evenflo’s guidance is that most car seats (including GoTime models) expire 6 years from the manufacture date. The seat’s date-of-manufacture label (DOM) is printed on the bottom/back of the booster; the GoTime manual directs you to use that label to determine the expiration. [1][2]

Evenflo FAQ page and GoTime Owner's Manual (date-of-manufacture / DOM label on bottom)

Yes. Replacement parts for this GoTime booster — the removable seat pad, shoulder/belt-positioning clip, and cup-holder assemblies — can be ordered through Evenflo’s ParentLink Part Store or by contacting Evenflo ParentLink; have your booster’s model number and date-of-manufacture (on the bottom of the seat) ready and ParentLink will confirm the correct part numbers and place the order. For parts/orders use the Evenflo ParentLink Part Store (parts.evenflo.com) or contact ParentLink by phone 937-773-3971 or email parentlink@evenflo.com; the owner’s manual also directs customers to order parts through Evenflo/ParentLink. [1][2]

Evenflo GoTime owner’s manual 'Replacement Parts' section and Evenflo ParentLink Part Store (parts.evenflo.com) with contact info

This booster’s assembled seat width is 7.44 inches (the listed “W” dimension), and the contoured sitting surface will be roughly that wide. Two side‑by‑side would occupy about 14.9 inches total, which fits most full‑size and many midsize rear benches but can be tight on narrow seats or where a center armrest/recess reduces usable width—measure the vehicle’s usable seat space between armrests or seat bolsters to confirm.

product_description; features & specs (assembled dimensions 7.44" W × 7.88" H × 15.2" D)