Do I need to use the mounting cups that are included in the hardware package?

The mounting cups should be used to ensure the safety and security of the gate.

Can I get replacement parts for my gate?

Most components will be included in a prepackaged hardware set and may not be sold separately. Any Baby Gate Replacement Parts that are offered can be ordered directly on the website by using the search feature with the 4-digit model number (or name). If a component does not appear, it is not available for ordering or may be for a discontinued gate.

Can I use my pressure-mounted gate at the top of my stairs?

Model 8718 should never be used at the top of a stairway when secured only by tension as a pressure-mounted gate. Model 8718 can be used at the top of stairs when properly installed as a hardware-mounted gate using the included hardware pieces; this requires drilling holes into a solid mounting surface.

Why does my Supergate no longer stay tight where it is mounted?

The gate will stop holding tension if the two panels are slid open too widely prior to locking the handle. When the locking handle is rotated into the locked position the panels bump out to create the tension needed. If set too tightly the plastic handle/rear slide can crack or wear out causing loss of tension. If worn, replacement pieces can be ordered on the North States website by searching the model number.

How do I get the hardware out from between the panels of my Supergate?

Lay the gate on a flat surface and extend the top panel. Use your fingers through the holes to move the hardware into a position that allows extension. The plastic webbing is somewhat flexible; lift the top webbing or push down on the lower webbing to create an 'air pocket' and slide the pieces toward the frame, then slide them out.

Do you make an adapter that will let me mount my hardware-mounted gate as a pressure-mounted gate so I do not have to drill holes in my wall?

No. We do not manufacture an adapter to alter the way hardware-mounted gates install. All Hardware-Mounted Baby Gates must be attached directly to a solid surface such as a wooden stud and will require drilling holes.

Can I use wall anchors to install my gate into drywall?

Hardware-Mounted Baby Gates should not be installed using anchors. Drywall anchors have a maximum limit and cannot guarantee the gate will not dislodge. Hardware-mounted gates require a solid surface such as a wooden stud.

Toddleroo by North States

New Toddleroo by North States Supergate Ergo Baby Gate 26" to 42" Wide - 26" Tall (Sand)

5/5 (1)

$18.79$26.91-30%

In Stock

The Toddleroo by North States Supergate Ergo Baby Gate is a plastic child safety gate designed to block stairs, doorways, hallways, and other off-limit areas. It adjusts to fit openings 26 to 42 inches wide and stands 26 inches tall. The gate offers two installation options: pressure-mounting for quick setup without tools, or hardware-mounting for use as a swing gate at the top of stairs. It features an ergonomic easy-press handle for one-handed operation and is JPMA-certified and made in the USA.

Category: Baby & Toddler > Baby Safety > Baby & Pet Gates

View on merchant site JSON

GTIN: 0026107087188
MPN: TODDLEROO-0026107087188-NEWOVERSTOCK-NOBOX

Specifications

Material: Plastic
Gender: unisex
Age Group: toddler
Condition: new
Category: Baby & Toddler > Baby Safety > Baby & Pet Gates

Image Analysis

11 images

01high: Studio shot of a beige plastic safety gate panel with a diamond lattice pattern and adjustable latch; a baby in a white outfit sits in front of the panel holding a spotted teething giraffe toy.
beige plastic gate paneldiamond lattice patternhorizontal reinforcement baradjustable latch handlevisible metal screwleft mounting bracketright mounting bracketbeige matte plastic finishstudio white backgroundbaby seatedbaby holding teething giraffe toybaby wearing white knit outfit
02high: Interior scene showing a beige plastic safety gate installed at a kitchen doorway with a seated smiling baby in front holding a giraffe teether and a plush toy nearby. Visible background includes white cabinets, stainless steel refrigerator and oven, dark countertop, white tile backsplash, and hardwood floor.
plastic safety gate with lattice patternadjustable mounting brackets on gate sideshorizontal slide latch on gatebeige gate colorwhite kitchen cabinetsmetal drawer handlesstainless steel refrigerator doorstainless steel oven with control knobsdark countertopwhite subway tile backsplashhardwood floor with wood grainwhite baseboardsmiling seated babybaby holding giraffe teethergiraffe teether with spotted patternpink and green plush toy shaped like fruitbaby wearing cream knit outfitsmall round teething ring toy on floor
03high: Top view of an adjustable beige plastic safety gate panel with diamond lattice openings, sliding adjustment mechanism and lever handle, shown with turquoise arrows indicating adjustable width and a turquoise infographic band below.
OCR: Adjusts to Fit Openings 26 in - 42 in. 26 in. Material: Durable Plastic. Color: Sand. Mounting: 2-in-1 Pressure or HardwareFlat lay
beige plastic paneldiamond lattice patternhorizontal reinforcement barsadjustable sliding mechanismratcheting teethlever handletop mounting slotside mounting knobsturquoise double-headed arrowsturquoise vertical arrowblack measurement textturquoise rectangular infographic panelshield iconcolor swatch labeled Sandblack circular 2-in-1 iconwhite backgroundstudio lighting
04high: Split scene showing a beige plastic safety gate installed in two ways: pressure-mounted between rooms at kitchen threshold with a baby seated in front, and hardware-mounted as a swing gate at top of stairs with a woman holding a child. Background includes kitchen appliances, cabinetry, stair railing, framed art, and a vase of yellow flowers.
OCR: 2-in-1 Gate. Pressure-mount between rooms and bottom of stairs or Hardware-mount as swing gate at top of stairs (tools required)
plastic safety gatehoneycomb lattice panelhorizontal support barcenter sliding latchpressure-mounted installationhardware-mounted installationwood floorwhite kitchen cabinetsstainless steel refrigeratorstainless steel ovenkitchen island counterbaby sitting on floorpink stuffed toywoman leaning on counterwoman holding childchild holding orange stuffed toystair railingframed wall artyellow flowers in vasewhite painted wallsturquoise product banner
05high: A toddler stands holding a plastic safety gate installed at a kitchen doorway while a woman kneels behind it; kitchen appliances and cabinets are visible and a large Baby Safety Alliance verified badge and turquoise promotional banner appear on the image.
OCR: BABY SAFETY ALLIANCE. VERIFIED. Sample-tested to meet U.S. Federal, ASTM and other safety requirements. Dependable Security. Certified safe by the Baby Safety Alliance
plastic safety gatediamond lattice panel patternvertical support framewall mounting bracketintegrated handle slottoddler standing holding gatewoman kneeling behind gatehardwood floorwhite kitchen cabinetsstainless steel refrigeratorstainless steel gas rangegranite countertoplarge circular verification badge graphicturquoise promotional banner
06high: Woman is installing or adjusting a beige plastic safety gate in a kitchen doorway; stainless steel appliances, white cabinets, wood floor and a wood countertop are visible.
OCR: Easy-Grip Handle. Allows you to quickly and easily pressure-mount gate with no tools
woman kneelingshort-sleeve topnecklaceplastic safety gatediamond lattice patterneasy-grip handlepressure-mount hardwarepivot hingewood floorwhite baseboardwhite kitchen cabinetswood countertopstainless steel refrigeratorstainless steel microwavestainless steel stovewhite subway tile backsplashkitchen islandarrow graphic on gate
07high: Close up of a beige plastic pressure mount safety gate installed against a white wall and door frame, showing a wall cup mount, rubber bumper, and hardwood floor; teal informational panels with product text flank the images.
OCR: Secure Pressure Mount. Wall cups provide extra security & holding power. Rubber Bumpers. Accommodate baseboards up to 4" high.
plastic pressure mount safety gateplastic wall cup mount attached to wallbeige plastic gate panel with diamond cutout patternrubber bumper on gate bottomwhite painted wallwood door framewood baseboardhardwood floorteal product information backgroundlarge black sans serif headline textblack body text
08high: A white plastic safety gate installed at a kitchen entrance with a smiling baby held by a kneeling woman in front of it; kitchen cabinets and a stainless steel stove are visible behind the gate and an American flag graphic and a turquoise banner reading 'Proudly Made in the USA' appear in the image.
OCR: Proudly Made in the USA
plastic safety gatediamond lattice panel patternadjustable sliding latchwhite plastic finishwood floorbeige kitchen cabinetsstainless steel stovewoman kneelinglong dark brown hairsmiling babycream baby outfitAmerican flag graphicturquoise bottom bannerblack bold text on bannerwood countertop edge
09high: A white puppy wearing a blue bandana sits inside a doorway blocked by a beige plastic safety gate; a rope toy lies on the wood floor and a stainless steel dog bowl is nearby; kitchen appliances and cabinets are visible beyond the gate.
OCR: Great for pets too!
white puppyblue patterned bandanaplastic safety gatediamond lattice panel patternadjustable sliding latchwood floorstainless steel dog bowlrope dog toykitchen cabinetsrefrigeratoroven rangewhite painted door frameturquoise promotional banner strip
10high: A toddler stands holding a white safety gate in a doorway next to a wall covered in large floral wallpaper; window, baseboard, and hardwood floor are visible. A TODDLEROO by northstates logo appears at the bottom left.
OCR: TODDLEROO by northstates
toddler standingplastic pressure gatediamond lattice gate panelwhite gate framefloral wallpaperlarge flower illustrationteal wallpaper backgroundhardwood floorwhite baseboardwhite wall panelingwindow with white trimdoorway trimchild romper with small check patternturquoise bow headbandlogo sticker at bottom left
11high: Top-down studio flat lay showing a beige pre-assembled plastic gate with lattice pattern and latch alongside mounting hardware, adhesive pads, screws, and an instruction manual on a white background under a teal header that reads 'What's in the Box'.
OCR: What's in the Box. 1x Pre-Assembled Gate. 2x Casement Hinges. 2x Gate Hinges. 4x Wall Cups. 4x Tape Pads. 8x Screws. 1x Instruction Manual. northstates. INSTRUCTIONS FOR MODELSFlat lay
beige plastic gate paneldiamond lattice patternintegrated handle latchsliding latch trackpre-assembled gate framefour beige wall cupstwo metal casement hinge platestwo metal gate hinge bracketsfour beige plastic hinge coverssmall metal screwssmall metal bolts with nutswhite adhesive tape padsinstruction manual booklet with cover imageteal header bannerwhite studio backgroundoverhead flat lay compositioneven studio lighting

Brand PDP Lookup

Brand: Toddleroo by North States
URL: https://northstatesind.com/toddleroo-by-north-states-supergate-ergo-sand/

Toddleroo by North States Supergate® Ergo Sand

Also Seen Here

2 retailers

amazon.com
high
Toddleroo by North States - Supergate Ergo Baby Gate: Plastic Baby Gate for Stairs & Doorways - Adjustable Indoor Safety Gate - Made in USA - 26 to 42 Inches Wide - 26 Inches Tall - Sand
Toddleroo by North States
View listing →
babyquip.com
high
Toddleroo by North States 42” Wide Supergate Ergo Baby Gate: Great for doorways or stairways. 26” - 42” Wide
Toddleroo by North States
View listing →

Documents & Data

Customer Reviews

1 reviews · out of 5

Kidsy had exactly the baby/pet gates we…

★★★★★Eileen W

Kidsy had exactly the baby/pet gates we needed...good price...good shipping...good items. If you have children or know someone who has children...this site is a keeper! They get 10 stars!!

Q&A

7 answered

Do I need to use the mounting cups that are included in the hardware package?: The mounting cups should be used to ensure the safety and security of the gate.
Can I get replacement parts for my gate?: Most components will be included in a prepackaged hardware set and may not be sold separately. Any Baby Gate Replacement Parts that are offered can be ordered directly on the website by using the search feature with the 4-digit model number (or name). If a component does not appear, it is not available for ordering or may be for a discontinued gate.
Can I use my pressure-mounted gate at the top of my stairs?: Model 8718 should never be used at the top of a stairway when secured only by tension as a pressure-mounted gate. Model 8718 can be used at the top of stairs when properly installed as a hardware-mounted gate using the included hardware pieces; this requires drilling holes into a solid mounting surface.
Why does my Supergate no longer stay tight where it is mounted?: The gate will stop holding tension if the two panels are slid open too widely prior to locking the handle. When the locking handle is rotated into the locked position the panels bump out to create the tension needed. If set too tightly the plastic handle/rear slide can crack or wear out causing loss of tension. If worn, replacement pieces can be ordered on the North States website by searching the model number.
How do I get the hardware out from between the panels of my Supergate?: Lay the gate on a flat surface and extend the top panel. Use your fingers through the holes to move the hardware into a position that allows extension. The plastic webbing is somewhat flexible; lift the top webbing or push down on the lower webbing to create an 'air pocket' and slide the pieces toward the frame, then slide them out.
Do you make an adapter that will let me mount my hardware-mounted gate as a pressure-mounted gate so I do not have to drill holes in my wall?: No. We do not manufacture an adapter to alter the way hardware-mounted gates install. All Hardware-Mounted Baby Gates must be attached directly to a solid surface such as a wooden stud and will require drilling holes.
Can I use wall anchors to install my gate into drywall?: Hardware-Mounted Baby Gates should not be installed using anchors. Drywall anchors have a maximum limit and cannot guarantee the gate will not dislodge. Hardware-mounted gates require a solid surface such as a wooden stud.

Reddit Insights

2 threads · r/daddit, r/Parenting

Reddit users looking for frustration-free baby gates mention North States Supergate as a decent option, but specific discussions on the Ergo Sand model are limited.

neutral sentiment60% match

No strong positive or negative sentiment specifically about the Toddleroo Supergate Ergo Sand. General gate discussions are mixed. Thread 1 mentions North States briefly without detail; Thread 2 is about a different brand.

Themes

Ease of usemixed

Durabilitynegative

Compared To

vs Regalo Swing Wide Walk Through Gate

Regalo is a popular alternative for pressure-mounted gates but has reported durability issues with the latch.

Source Threads

North States Supergate recommended as a frustration-free baby gate
We have a North States Supergate. It has a handle you flip to tighten it rather than dealing with the little push-down bolts on the bottom. So much easier to get through.
u/squeegyr/dadditView thread →
Regalo gate latch durability concerns without mention of Toddleroo
Regalo. Swing wide walk through gate. But we've had them break at the latch too many times. The plastic gets brittle and cracks.
u/saintnyshonr/ParentingView thread →