Baby Trend EZ-Lift 35 PLUS Infant Car Seat (Ultra Grey)

Baby Trend EZ-Lift PLUS Infant Car Seat: a lightweight (under 8 lb) infant car seat with an ergonomic grip for easier lifting, a multi-position base with flip foot recline and bubble level, No-Twist Harness Indicator, and FAA approval for airplane use. Meets and exceeds federal safety standards.

Built-in ergonomic grip; weighs less than 8 lb (7.5 lb without base); handle usable as anti-rebound bar when rotated forward; Flip Foot recline; bubble level indicator; multi-position base; No-Twist Harness Indicator; LATCH-equipped base; plush seating; 5-point harness; FAA approved for airplane use; compatible with CB02100A base.

Color

Dash Black · black

Material

Seat pad: 92% polyester fiber, 8% polyurethane foam; Seat pad / head insert / body insert: 100% polyester fiber

Secondary

polyurethane

Occasion

travel

Gender

unisex

Age Group

infant

Condition

used

Weight

8 lb

Dimensions

16.5x26.5x24 in

Category

Baby & Toddler > Baby Transport > Baby & Toddler Car Seats

01

Product

Rear-facing infant car seat with molded black plastic base and integrated carrier handle, dark grey fabric canopy and light grey padded infant insert and harness visible.

• Overall formOne-piece infant carrier shell mounted on a detachable black plastic base; shell has a contoured seating area and integrated carrying handle that arches over the top.
  1 region

  x 0.06 · y 0.06 · w 0.88 · h 0.88 (medium)
• Carrying handleSemi-circular rigid black plastic handle that pivots at the sides and sits upright over the canopy.
  1 region

  x 0.18 · y 0.00 · w 0.64 · h 0.30 (high)
• CanopyDark grey fabric canopy attached to the shell, extending from the rear toward the front and covering the upper part of the seat; smoothly curved panel without visible mesh.
  1 region

  x 0.30 · y 0.04 · w 0.60 · h 0.56 (high)
• Infant insertLight grey padded head and body insert with contoured side supports visible inside the seat opening.
  1 region

  x 0.36 · y 0.18 · w 0.36 · h 0.34 (high)
• Five-point harness strapsPair of dark harness straps emerge near the seat opening and rest over the infant insert; buckle area partly obscured by the fabric crotch pad.
  1 region

  x 0.40 · y 0.36 · w 0.30 · h 0.28 (medium)
• Front fabric cover/armrestLight grey fabric-covered front panel or armrest with a small dark tab or release visible on its top center edge.
  1 region

  x 0.14 · y 0.44 · w 0.54 · h 0.20 (high)
• Plastic baseDeep black molded plastic base with a recessed front lip and integrated belt/router features on the side; base supports the carrier shell.
  1 region

  x 0.04 · y 0.65 · w 0.92 · h 0.31 (high)
• Warning labelSmall rectangular warning label with yellow header and pictogram located on the left shoulder area of the seat interior, text too small to read in this image.Partial
  1 region

  x 0.30 · y 0.14 · w 0.18 · h 0.12 (high)
• Brand marking“Lower front of the plastic base shows a white wordmark logo reading babytrend.”
  1 region

  x 0.14 · y 0.71 · w 0.30 · h 0.12 (high)

Other

Product photographed on a plain white background with even studio lighting, slight shadow under base, square crop centered on the seat.

• BackgroundUniform white background without props or visible seams.
• Lighting and shadowSoft, even studio lighting with a faint soft shadow beneath and to the lower left of the base.
• Shot compositionThree-quarter front view of the carrier slightly angled to the right, centered in a square frame.

Colors

dark grey· canopy and outer shell fabric#6C6B74light grey· infant insert padding#D3D5DAblack· handle and base plastic#131314

02

Product

Rear-facing infant car seat carrier with a molded black plastic base, gray fabric canopy and shell, and a lighter gray padded infant insert visible in the seating area.

• Overall geometryOne-piece infant carrier shell mounted on a separate molded plastic base; shell has contoured bucket shape with integrated seating area and an attached canopy.
  1 region

  x 0.06 · y 0.06 · w 0.88 · h 0.86 (high)
• CanopyFolded hood-style canopy in mid gray fabric that arches over the seat and attaches at the shell sides; inner canopy fabric appears slightly darker than outer face.
  1 region

  x 0.08 · y 0.03 · w 0.56 · h 0.44 (high)
• Seat paddingLight gray padded infant insert with visible head support contours and slightly darker seam piping around the edges.
  1 region

  x 0.35 · y 0.20 · w 0.42 · h 0.40 (high)
• Outer fabric shellDarker gray fabric covers the outer shell and sides of the seating area, with stitched seams and a smooth matte finish.
  1 region

  x 0.22 · y 0.12 · w 0.58 · h 0.62 (high)
• Plastic baseBlack molded plastic base with integrated support contours and a recessed handle area at the front; base is a separate component below the fabric shell.
  1 region

  x 0.12 · y 0.56 · w 0.76 · h 0.38 (high)
• Release lever or handleSmall black plastic strap or release tab located at the front center of the seating area, resting over the light gray fabric.
  1 region

  x 0.58 · y 0.44 · w 0.18 · h 0.12 (medium)
• Side handle pivotRounded black hinge/pivot piece on the left side that likely connects to a carrying handle; visible circular fastener detail.
  1 region

  x 0.02 · y 0.38 · w 0.22 · h 0.28 (high)
• Warning labelYellow and white rectangular safety/warning label affixed to the upper right interior side of the shell, with small printed text.
  1 region

  x 0.56 · y 0.12 · w 0.18 · h 0.12 (high)
• Brand mark on baseLower front right area of the base shows a white logotype and small icon printed on the black plastic.
  1 region

  x 0.57 · y 0.72 · w 0.30 · h 0.18 (high)
• Fabric textureSeat fabrics appear woven with a smooth matte finish and visible stitched seams where panels meet.

Other

Product photographed on a white background with soft shadowing; three-quarter front-right view with even studio lighting and no props or people.

• Shot compositionThree-quarter view from the front-right showing most of the carrier and base; product centered in frame with full visibility of canopy and base.
• Background and lightingPlain white seamless background with soft diffuse lighting and subtle shadow beneath the base consistent with studio photography.
• Image qualitySharp focus on the product with even exposure and no visible noise or motion blur.

Colors

medium gray· outer fabric shell and canopy#7B7A85light gray· infant insert padding#D2D5DAmatte black· base#141314safety yellow· warning labelwhite· brand mark printing

03

Product

Side view of an infant car seat showing a curved carry handle, fabric canopy and seating area in grey tones mounted on a black plastic shell and base with a visible recline/indicator area and harness webbing.

• Overall orientationProfile side view of an infant car seat with the handle in raised position and canopy extended over the seating area.
• Carry handleSingle large curved carry handle made of black textured plastic with a hollowed inner section and ribbed grip detail along the upper curve.
  1 region

  x 0.05 · y 0.03 · w 0.26 · h 0.60 (high)
• CanopyFolded grey fabric canopy with stitched seams and a small fabric tag on the outer edge; canopy forms an angled hood over the seat.
  1 region

  x 0.44 · y 0.03 · w 0.42 · h 0.45 (high)
• Seat shell and baseOne-piece deep black plastic shell and integrated base with smooth and contoured surfaces, appearing matte to low-sheen.
  1 region

  x 0.12 · y 0.40 · w 0.72 · h 0.40 (high)
• Fabric seating areaPadded seating insert and shoulder area covered in medium grey fabric matching the canopy, visible around the shell opening.
  1 region

  x 0.20 · y 0.25 · w 0.30 · h 0.30 (high)
• Harness/webbingLight grey harness webbing visible routed near the base on the left side with a sewn adjustment section and plastic hardware
  1 region

  x 0.08 · y 0.62 · w 0.28 · h 0.20 (high)
• Recline/level indicatorSmall rectangular green indicator label or window located on the side of the base near the mid-lower area.
  1 region

  x 0.46 · y 0.66 · w 0.08 · h 0.04 (medium)
• Side printed marking“Text printed on the fabric side panel reading 'SIDE-GRIP'.”
  1 region

  x 0.50 · y 0.43 · w 0.28 · h 0.18 (high)
• Small canopy tag“Small vertical fabric tag on the canopy outer edge with a short word or logo; legibility limited by size.”Partial
  1 region

  x 0.56 · y 0.12 · w 0.05 · h 0.10 (medium)

Other

Studio product shot on a white background with even lighting and soft shadow beneath the product; image framed to show the full side profile.

• Background and lightingEven white background with diffuse studio lighting and a faint soft shadow under the base.
• Shot compositionCentered side-profile composition with the entire product visible and slight cropping allowance on leftmost handle tip.
• Image qualitySharp focus on product surfaces and textures with no visible motion blur.

Colors

matte black· handle and shell#100F12medium grey· canopy and seat fabric#8C8B92light grey· harness webbing#B4B1B5signal green· indicator label

04

Product

Two side-by-side views of the same infant car seat showing handle, canopy, shell, and base; right image shows a slightly more reclined base/foot support position.

• Overall shapeInfant car seat with a contoured hard plastic shell, integrated base, upward-curving carry handle, and a fabric-covered canopy over the seating area.
  2 regions

  x 0.05 · y 0.18 · w 0.42 · h 0.56 (high); x 0.53 · y 0.18 · w 0.42 · h 0.56 (high)
• Carry handleBlack plastic carry handle arches from one side of the shell to the other; visible pivot joint near shell midpoint.
  2 regions

  x 0.10 · y 0.12 · w 0.30 · h 0.28 (high); x 0.58 · y 0.12 · w 0.30 · h 0.28 (high)
• Canopy fabricTapered grey fabric canopy with smooth matte finish covering the seating area; canopy is pulled forward in both views.
  2 regions

  x 0.08 · y 0.12 · w 0.28 · h 0.25 (high); x 0.60 · y 0.12 · w 0.28 · h 0.25 (high)
• Shell and baseMatte black plastic shell and integrated base with visible molded contours and a forward-facing foot/leg support that is extended in the right view.
  2 regions

  x 0.05 · y 0.32 · w 0.36 · h 0.40 (high); x 0.52 · y 0.32 · w 0.36 · h 0.40 (high)
• Metal latch / connectorSilver metal latch or connector hardware visible on the lower front side of the base near the vehicle-attachment area.
  2 regions

  x 0.06 · y 0.62 · w 0.14 · h 0.13 (medium); x 0.53 · y 0.62 · w 0.14 · h 0.13 (medium)
• Small indicatorSmall rectangular green indicator visible on the side of the base near the seating area.
  2 regions

  x 0.28 · y 0.60 · w 0.05 · h 0.04 (high); x 0.75 · y 0.60 · w 0.05 · h 0.04 (high)
• Fabric tagNarrow fabric tag on the canopy seam visible but text on the tag is not legible at this resolution.Partial
  2 regions

  x 0.22 · y 0.16 · w 0.03 · h 0.06 (medium); x 0.70 · y 0.16 · w 0.03 · h 0.06 (medium)

Other

Studio-style image showing two side-by-side product views on a white background with an orange right-pointing arrow between them; even lighting with soft shadows beneath bases.

• CompositionTwo nearly identical seat profiles positioned left and right with a graphic arrow centered between them indicating a change or adjustment.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 1.00 (high)
• Graphic arrowSolid orange right-pointing arrow graphic placed between the two seats.
  1 region

  x 0.46 · y 0.33 · w 0.07 · h 0.12 (high)
• Background and lightingPlain white background with soft diffuse lighting; subtle shadow directly under each base.
• Image qualityHigh resolution with clear edges; no visible compression artifacts.

Colors

medium grey· canopymatte black· shell and base#131214indicator green· base indicator

05

Product

Close-up of the car seat lower side and base showing textured dark-plastic base, an integrated horizontal bubble level vial, a recessed rectangular cutout, and a small light-gray rectangular button.

• Base geometryCurved, contoured lower base made of textured dark plastic with a rounded cutout at the bottom center and a vertical rectangular recess on the lower right.
  1 region

  x 0.02 · y 0.46 · w 0.96 · h 0.48 (high)
• Bubble level vialSmall horizontal bubble level embedded in the outer face of the base; vial contains yellow-green liquid and a visible bubble centered between two black alignment lines.
  1 region

  x 0.34 · y 0.28 · w 0.32 · h 0.12 (high)
• Textured plastic finishMatte textured finish on the visible plastic surfaces of the base and side wall, showing a fine grain texture.
  1 region

  x 0.00 · y 0.20 · w 0.80 · h 0.70 (medium)
• Light-gray rectangular buttonSmall light-gray rectangular button or release tab set into the left portion of the base above a rounded pocket.
  1 region

  x 0.12 · y 0.60 · w 0.10 · h 0.12 (high)
• Thin elongated slotShallow angled slot or groove molded into the base surface just below the bubble level vial.
  1 region

  x 0.28 · y 0.34 · w 0.40 · h 0.08 (high)

Other

Tight product detail crop on a white background with soft shadowing and even studio lighting; image is centered on the base and slightly cropped at the left and right edges.

• Shot compositionTight close-up crop focusing on the lower side of the seat; edges of the product are cropped at left and right.
• Background and lightingPlain white background with soft diffuse lighting producing minimal harsh shadows and a subtle shadow under the base.

Colors

dark charcoal· base plastic#1C1C1Cyellow-green· bubble level liquidtranslucent clear· bubble level housinglight gray· button/tab

06

Product

Rear/side view of an infant car seat being carried by its arched carry handle; visible details include a black fabric canopy, a matte black plastic shell/base, and a dark molded handle with a visible pivot hinge.

• Canopy fabricLarge rounded canopy made from a smooth black fabric that drapes over the seating area with visible seam lines and slight wrinkling where it folds.
  1 region

  x 0.38 · y 0.06 · w 0.50 · h 0.40 (high)
• Plastic shell/baseMatte black molded plastic lower shell and base with defined vertical panels and an inset rectangular recess on the outer side.
  1 region

  x 0.46 · y 0.35 · w 0.36 · h 0.40 (high)
• Carry handle constructionSingle arched carry handle in a dark hard plastic with visible internal ribbing on the inside face and a circular pivot joint where it attaches to the shell.
  1 region

  x 0.22 · y 0.04 · w 0.20 · h 0.64 (high)
• Hinge detailRound hinge cover at the handle attachment point with a visible small circular recess and a seam line where the handle meets the shell.
  1 region

  x 0.28 · y 0.30 · w 0.12 · h 0.20 (high)
• Fabric tagSmall vertical fabric tag attached to the edge of the canopy near the handle; text on the tag is not legible at this resolution.Partial
  1 region

  x 0.48 · y 0.12 · w 0.04 · h 0.10 (medium)

Other

Lifestyle scene showing the seat held by a person at waist height; outdoor background, even natural lighting, and slight shadowing under the seat.

• Person holding seatA person's right hand grasps the handle near its pivot point; forearm and torso cropped into frame and resting at the left edge of the image.
  1 region

  x 0.12 · y 0.06 · w 0.26 · h 0.62 (high)
• Shot compositionTight lifestyle crop focusing on the seat and handle, with the product centered right-of-center and the person occupying the left third.
• Background and settingOutdoors with soft-focus greenery and a pale paved surface visible behind the product; warm natural daylight provides even illumination and soft shadows.
  1 region

  x 0.58 · y 0.60 · w 0.34 · h 0.30 (medium)
• Image qualitySharp focus on the car seat and handle with natural depth of field causing background blur; no obvious compression artifacts.

Colors

black· canopy#1B1514matte black· plastic shell/base#0E0E0Adark charcoal· carry handle#1B1A1C

• target.com

  high

  Baby Trend EZ-Lift Plus Infant Car Seat - Ultra Gray

  Baby Trend

  View listing →
• walmart.com

  high

  Baby Trend EZ-Lift™ PLUS Infant Car Seat

  Baby Trend

  View listing →
• gobabyonline.com

  medium

  Baby Trend EZ-Lift PLUS Infant Car Seat, Ultra Grey

  Baby Trend

  View listing →
• vehicleoutdoor.com

  low

  EZ-Lift Plus Infant Car Seat - Ultra Gray (See Description)

  Baby Trend

  View listing →
• amazon.com

  high

  Baby Trend EZ-Lift™ Plus Infant Car Seat, Ultra Grey

  Baby Trend

  View listing →
• vminnovations.com

  high

  Baby Trend EZ-Lift Plus Lightweight Infant Car Seat, Cozy Cover & Base – Magnolia

  Baby Trend

  View listing →